31
Front Engine Dragsters / Re: Finally made it to the track today
« on: July 30, 2017, 06:35:13 AM »
SWEAT, NOW PICS
FEDs Forever!
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
33
Front Engine Dragsters / Re: What did you do on your Front Engine Dragster TODAY?
« on: July 25, 2017, 11:29:50 AM »
sweat have fun!!!!!!! 
34
Bikes / thought a ask
« on: July 20, 2017, 06:38:38 PM »
looking for a 1962 xlch front primary gear thanks steve m 
35
Spud Miller's Cave / Re: Motor dies
« on: July 17, 2017, 05:29:11 PM »
thanks Steve will try that.
went testing Saturday, stayed off the brakes longer, motor did not die after the burn out, but still die at the big in
and yes it a PIG!! 5.30, 5.30 5.31 5.30 131 or 132 mph IN THE 1/8, now I have a driver! Richard Lawson, now can we just get to a race?
went testing Saturday, stayed off the brakes longer, motor did not die after the burn out, but still die at the big in
and yes it a PIG!! 5.30, 5.30 5.31 5.30 131 or 132 mph IN THE 1/8, now I have a driver! Richard Lawson, now can we just get to a race?
36
Spud Miller's Cave / Re: Motor dies
« on: July 04, 2017, 06:19:00 PM »
that was the plan! but if we can not find the gremlin no!
37
Spud Miller's Cave / Re: Motor dies
« on: July 04, 2017, 01:14:22 PM »
THANKS GLENN WE ARE GOING TO MOVE THE MAIN OF THE PUMP AND TRY AGAIN
WE HAVE ONE MORE TEST BEFORE THE NEXT NDRL RACE
STEVE M
WE HAVE ONE MORE TEST BEFORE THE NEXT NDRL RACE
STEVE M
38
Spud Miller's Cave / Re: Motor dies
« on: July 02, 2017, 12:21:16 PM »
Well that did not go well! went testing last week
almost lost our new fed.
car made a very hard right turn! even the tower said that was a great save.
original fix
baffels in the tank?
we put 4 baffels in the tank.
1st problem,
it blow fuel out the rear vent, right onto the right rear tire, never done that before! thanks to (go pro)
fix?
going to tie front and back vents together and put them into a vented punk tank not going to do that again you say heart attack!
SECOND PROBLEM IS STILL THE PROBLEM TRYING TO FIX. SECOND PASS THE MOTOR DIED AGAIN AFTER THE BURN OUT, BAFFLES DID NOT FIX THE PROBLEM.
FIX
WE PUT THEM IN THE WRONG PLACE.
IT'S NOT THE TANK
QUESTION SPUD
IF YOU REMEMBER WE ARE RUNNING THE MAIN BY PASS OFF THE PUMP ( PIC IS ON HERE UNDER PUMP I THINK, REMOVED ALL THE INTERS)
COULD THIS BE THE PROBLEM, CAVITATING IN THE PUMP
FUEL TANK TO FAR FROM PUMP.
FUEL LINE, IS 1" ALUM TO 10" OF # 12 HOSE TO PUMP
GOING TO CHANGE THE MAIN BY PASS TO RIGHT BEFORE THE BARROW VALVE TEE OFF.
PLUG THE PUMP
IT SOMETHING STUPID I KNOWN!
AS ALWAYS THANKS FOR YOU TIME
STEVE M
almost lost our new fed.
car made a very hard right turn! even the tower said that was a great save.
original fix
baffels in the tank?
we put 4 baffels in the tank.
1st problem,
it blow fuel out the rear vent, right onto the right rear tire, never done that before! thanks to (go pro)
fix?
going to tie front and back vents together and put them into a vented punk tank not going to do that again you say heart attack!
SECOND PROBLEM IS STILL THE PROBLEM TRYING TO FIX. SECOND PASS THE MOTOR DIED AGAIN AFTER THE BURN OUT, BAFFLES DID NOT FIX THE PROBLEM.
FIX
WE PUT THEM IN THE WRONG PLACE.
IT'S NOT THE TANK
QUESTION SPUD
IF YOU REMEMBER WE ARE RUNNING THE MAIN BY PASS OFF THE PUMP ( PIC IS ON HERE UNDER PUMP I THINK, REMOVED ALL THE INTERS)
COULD THIS BE THE PROBLEM, CAVITATING IN THE PUMP
FUEL TANK TO FAR FROM PUMP.
FUEL LINE, IS 1" ALUM TO 10" OF # 12 HOSE TO PUMP
GOING TO CHANGE THE MAIN BY PASS TO RIGHT BEFORE THE BARROW VALVE TEE OFF.
PLUG THE PUMP
IT SOMETHING STUPID I KNOWN!
AS ALWAYS THANKS FOR YOU TIME
STEVE M
40
Front Engine Dragsters / Re: What did you do on your Front Engine Dragster TODAY?
« on: June 12, 2017, 06:16:48 AM »
we run 20* on both cars
41
Roo Man's Room / Re: Recommended tube bender
« on: June 11, 2017, 03:05:49 PM »
we use pro tool bender, the bender is not bad, it's the dies that hurt?
?
about 10 years ago we redid a mark Williams car that mark build (fed) yes he used a gas torch to heat the tubes. we had many phone calls with then about that car.
steve m
?about 10 years ago we redid a mark Williams car that mark build (fed) yes he used a gas torch to heat the tubes. we had many phone calls with then about that car.
steve m
42
Wanted to sell / roller for sale
« on: June 02, 2017, 06:32:37 PM »
230" roller all nhra certs current put your motor and trans in and go racing! 7.50 cert, lost driver do to making me a grandpa
7000.00 firm
if paid for, can bring to hot rod union in BG if you pay the fuel there about 150.00
yes Amanda is shoeing in the pic
thanks for looking
steve m
7000.00 firm
if paid for, can bring to hot rod union in BG if you pay the fuel there about 150.00
yes Amanda is shoeing in the pic
thanks for looking
steve m
44
Spud Miller's Cave / Re: Motor dies
« on: May 16, 2017, 04:26:00 AM »
thanks all cutter her up this am 