FrontEngineDragsters.Org Forum
Technical => Roo Man's Room => Topic started by: bad penny on February 21, 2015, 10:17:51 AM
-
Is there a standard caster angle used on the axle of a front engine dragster? Does wheel base have any bearing on this
-
depends on the front tires weather its a newer flat crown race tire or a motorcycle rounded type crown
-
In my case its a motorcycle type tire 17"
-
Not meaning to stop incoming input, but these past posts may help:
Front End Caster on a FED
http://www.frontenginedragsters.org/forum/index.php/topic,1173.msg8054.html#msg8054
Steering turns issue
http://www.frontenginedragsters.org/forum/index.php/topic,744.msg4837.html#msg4837
caster angle how critical 1* difference
http://www.frontenginedragsters.org/forum/index.php/topic,992.msg6673.html#msg6673
-
20 to 22 deg of castor then
-
Thanks for the info!! Will check to see where im at.