FrontEngineDragsters.Org Forum

Technical => Roo Man's Room => Topic started by: exracer on July 23, 2020, 08:24:35 AM

Title: 140-160" FED Build
Post by: exracer on July 23, 2020, 08:24:35 AM
I want to build a 140-160" " nostalgic" appearing fed, and I'm not having any luck with finding blue prints, or chassis builders who are willing to discuss the short wheel base.I would like to hear from some members who have built, and drove these cars . I would like to hear the pros, and cons. Thanks, Greg
Title: Re: 140-160" FED Build
Post by: 225digger on July 23, 2020, 09:25:47 AM
i posted in the other thread but here. its 200"....shorten it to how you want

https://swracecars.com/product/blue-print-200-front-eng-dragster/
Title: Re: 140-160" FED Build
Post by: exracer on July 23, 2020, 09:40:11 AM
Thanks, I will give them a try
Title: Re: 140-160" FED Build
Post by: steve elzy on July 29, 2020, 04:28:15 PM
I have MW print and a alignment bar for ford 9 inch and work in St.Paul. I went with MW because I thought it looked more the look of 60s. I did get my rollbars from Neil parks.I will not change you anything if I get them back. Just so you know it will cost more than you think and will take longer as well.Email me and I will give you my number if interested.