16
Roo Man's Room / Re: New Chassis
« on: March 24, 2016, 10:21:32 AM »
Steve, I have purchased from AED like Roo and had nothing but good experience.
FEDs Forever!
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
17
Front Engine Dragsters / Re: Man we are oldschool!
« on: March 22, 2016, 06:18:13 PM »
We used to have a guy in the midwest running top fuel with a open trailer...totally jealous!
18
Spud Miller's Cave / Re: plug wires and spud
« on: March 21, 2016, 05:40:21 PM »
Your thoughts on coil wire life using a MSD 12?
19
Wanted to buy / Re: WTB Injection, Ram, pump, cam etc
« on: March 20, 2016, 07:55:46 PM »
Stock cam tunnel or roller bearing?
21
Spud Miller's Cave / Re: propolen oxide
« on: February 11, 2016, 04:00:14 AM »
We used to stock it. Had it in a dark corner with a blanket over it and the gallon jugs of Nitro. The Kart guys would buy it and mix it with the oil. They would get checked for fuel but never the oil.
Open the ring gaps up just a tad and it would suck it right in.
Open the ring gaps up just a tad and it would suck it right in.
22
Front Engine Dragsters / Re: 1pc or 2 pc suit?
« on: February 08, 2016, 06:11:32 PM »
Two piece for me.
One of our NDRL racers has a two piece and the jacket has a tail...sorta like a tux but not as long. Basically the back half of the jacket is 5-6 inches longer to keep him covered up once he is seated.
One of our NDRL racers has a two piece and the jacket has a tail...sorta like a tux but not as long. Basically the back half of the jacket is 5-6 inches longer to keep him covered up once he is seated.
23
Wanted to sell / BRAND NEW INJECTED SBC
« on: January 29, 2016, 07:00:28 PM »
FOR SALE::
358 SBC>>>>>NEW<<<<<
Lunati Pro Series 3.520 Stroke
Manley 6.00 rods
JE Pistons 14:1
Total Seal Rings
All Clevite bearings
Comp Cams roller cam
Comp Cams lifters
Milodon Gear drive
ATI Damper
Moroso Pump/Pan
Dart Pro 1 CNC 227 runner Iron Heads.
PAC springs
Comp Cams roller rockers
Comp Cams Girdles
Enderle Stack Injection.
Enderle Pump.
Vertex Mag
Hedman Zoomies
This engine is completely new. The only used piece was the engine block. It is sitting on the stand at Freedom Racing Engines ready to go. It is perfect for a front engine dragster or small gasser
$15K
358 SBC>>>>>NEW<<<<<
Lunati Pro Series 3.520 Stroke
Manley 6.00 rods
JE Pistons 14:1
Total Seal Rings
All Clevite bearings
Comp Cams roller cam
Comp Cams lifters
Milodon Gear drive
ATI Damper
Moroso Pump/Pan
Dart Pro 1 CNC 227 runner Iron Heads.
PAC springs
Comp Cams roller rockers
Comp Cams Girdles
Enderle Stack Injection.
Enderle Pump.
Vertex Mag
Hedman Zoomies
This engine is completely new. The only used piece was the engine block. It is sitting on the stand at Freedom Racing Engines ready to go. It is perfect for a front engine dragster or small gasser
$15K
24
Wanted to sell / BRAND NEW ROOMAN FED
« on: January 29, 2016, 06:58:32 PM »
FOR SALE::
ROOMAN FED
Car is new and never ran
207" Wheelbase
22" Main Hoop
Aluminum Shorty body
New steering box
New Master Cylinder
Butler head pads
Carbon Fiber cage shroud
New Strange Fab 9.5
Plated for SBC
Fuel tank will be finished to your specs
I have a box with gauges and misc. stuff that goes with it...all new.
This car is new. It was purchased and never completed. Front wheels are not included.
$7500.00
ROOMAN FED
Car is new and never ran
207" Wheelbase
22" Main Hoop
Aluminum Shorty body
New steering box
New Master Cylinder
Butler head pads
Carbon Fiber cage shroud
New Strange Fab 9.5
Plated for SBC
Fuel tank will be finished to your specs
I have a box with gauges and misc. stuff that goes with it...all new.
This car is new. It was purchased and never completed. Front wheels are not included.
$7500.00
25
Wanted to sell / Re: Turnkey FED...just add driver.
« on: January 07, 2016, 03:52:23 AM »
George he will need to call or text the number on the for sale sign. Gene was a NDRL member so I know the car was tagged. The engine is brand new from Ross Racing and new is new block, heads, all of it. I would venture to say less than 15 passes on it.
28
Wanted to sell / Turnkey FED...just add driver.
« on: January 06, 2016, 06:32:57 PM »
This car belonged to Gene Ritchie who passed away this summer. His widow has the car for sale.
RACE READY FED FOR SALE: The car is a 1969 chassis,has a new,fresh,alum 400 chevy motor,alum heads,hilborn injection with Mag.The car is..ready to race NOW,not years down the road. It runs on 110 fuel.The car is NOT mine,but i have been ask to help sell the car which is located in Ohio. This deal includes a one yr old wedge nose trailer and 125 cc Yamaha atv to haul it around at the track.I will post some photos including the # of the guy who has it stored. Call or text Kurt. Thanks for looking.
$18,000 for car, trailer, and atv.
RACE READY FED FOR SALE: The car is a 1969 chassis,has a new,fresh,alum 400 chevy motor,alum heads,hilborn injection with Mag.The car is..ready to race NOW,not years down the road. It runs on 110 fuel.The car is NOT mine,but i have been ask to help sell the car which is located in Ohio. This deal includes a one yr old wedge nose trailer and 125 cc Yamaha atv to haul it around at the track.I will post some photos including the # of the guy who has it stored. Call or text Kurt. Thanks for looking.
$18,000 for car, trailer, and atv.
29
Wanted to sell / Re: VERTEX OXC MAG WITH COIL AND WIRES
« on: January 05, 2016, 09:40:47 AM »
Still have it?
30
Front Engine Dragsters / Re: Helmet Paint Job Looks LIke old silver mask
« on: December 27, 2015, 04:35:55 AM »
The guy that painted it is a old school sign painter...not many of them left around. The red was loaded with flake and you can see pieces of it reflecting in that photo. He actually used rubber undercoating to make the goggle strap so it would look more realistic then cleared over it.