FrontEngineDragsters.Org Forum
Technical => Dan Dishon's Transmission Den => Topic started by: noslin on February 18, 2018, 09:19:56 PM
-
what size hose should i get for looping the line on the cooler in/out fittings. -6 or -4? idea on length of hose. figure id get a pre-made one.
-
Mine was -6
-
Thanks Paul
-
-6 is the standard. -4would be to restrictive. If you have someone who can pull the pump and remove the bypass you can put pipe plugs in case. As far as length goes 12" would be as short as I think you get away with, without kinking it.