FrontEngineDragsters.Org Forum

Technical => Matt Shaff's Engine Shop => Topic started by: noslin on June 07, 2017, 09:03:20 PM

Title: which accusump
Post by: noslin on June 07, 2017, 09:03:20 PM

which accusump to get. there is like six options for the 3qt. 

https://www.cantonracingproducts.com/product/24-006/24-006----ACCUSUMP-3QT-NO-VALVE/


ty
dean

Title: Re: which accusump
Post by: ricardo1967 on June 08, 2017, 09:48:58 AM

Quote from: noslin on June 07, 2017, 09:03:20 PM

which accusump to get. there is like six options for the 3qt. 

https://www.cantonracingproducts.com/product/24-006/24-006----ACCUSUMP-3QT-NO-VALVE/


ty
dean

Dean, I'd suggest you calling Canton. And if you could, sharing their recommendation here.

Title: Re: which accusump
Post by: noslin on June 08, 2017, 03:00:29 PM

well, messed that whole question up. should of put more thought into it and read tad more.  guess the question could be posed to the valves.

so, two 3 qt accusumps. one is longer and holds more air for higher pressure. so i guess depends on space limitations.   so, keeping it simple it would be the manual ball valve (im guessing).  ill call as suggested as the electric psi ratings has me wondering about manual psi in accusump vs engine oil psi.

ty
dean

Title: Re: which accusump
Post by: dreracecar on June 08, 2017, 03:04:04 PM

In over 20 years, never ran one, Milodon oil pan and proof that the gage went to "0" at the chute hit, changed bearings every 3 years during annual rebuild