FrontEngineDragsters.Org Forum

Technical => Matt Shaff's Engine Shop => Topic started by: hotrod316 on February 21, 2013, 07:03:16 AM

Title: thicker gasket
Post by: hotrod316 on February 21, 2013, 07:03:16 AM

MATT, 
do you know anyone that is making a thicker intake gasket for a bb Chevy about .120 thick or can you use two  .060 and  glue them together. do not want to mill my old intake thanks your time steve m.  ???

Title: Re: thicker gasket
Post by: Frontenginedragsters on February 21, 2013, 07:38:31 AM

Steve:
I don't know which heads you have. Assuming your using OEM style rectangle port Chevy heads.
Mr.Gasket makes .120 thick gaskets.
#110 has the upper bolt hole between the ports [origanal Chevy style].
#122 fits aftermarket heads without the upper bolt hole.
Summit has both styles.

Matt

Title: Re: thicker gasket
Post by: hotrod316 on February 21, 2013, 11:37:08 AM

THANKS MATT!! will look them up right now
steve morgan

Title: Re: thicker gasket
Post by: Totally T on February 21, 2013, 06:49:50 PM

Fel Pro 1275-5...used them on mine!

Title: Re: thicker gasket
Post by: hotrod316 on February 22, 2013, 05:58:05 AM

thanks Troy, steve