FrontEngineDragsters.Org Forum
Technical => Spud Miller's Cave => Topic started by: gregm784 on April 25, 2018, 10:57:18 AM
-
In my mind, i see it better that the port check be located at the dist block so the feed line stays full.
Also, my idle check is 5.5#. port check should be............? 10?
-
Hi Greg!
Yup, I agree...in the distribution block is the way to go.
You just want to make sure it's closed at an idle, so typically about 15 PSI is good.
Spud
-
Thanks Spud
-
I finalized my port setup today. idle is 6# (normal for my deal) and the ports pop @ 14#. We are testing soon. :) thanks for the .032s. Adding to my collection. :) looking forward to having more even plug readings.