Topics

1

Roo Man's Room / Tach with Mag & Rev Limiter

« on: February 10, 2020, 11:44:55 AM »

 Changing over to Mag and using FIE rev limiter with MSD SW & 2 step
1) can the Tach or shift light be run off the Crank trigger somehow? Or do we have to use a pulse signal activator.
2) In either case should we use solid core  or suppression wires.
Thank You
Dennis

2

Roo Man's Room / Towing with a strap

« on: January 27, 2020, 04:15:00 PM »

What is the best spot to connect the strap to the car. We’ve been Connecting to center of the front axle. Steering feels little different after pulling it around a bit. Has a P&S box  175” FED Thanks

3

Roo Man's Room / Points mag rev limiter

« on: January 27, 2020, 02:54:12 PM »

Is the FEI-RPMLIMIT  points mag RPM limiter relay for internal or external coil mag?
Thank you

4

Spud Miller's Cave / Mag rev limiter

« on: April 27, 2019, 12:36:10 PM »

We purchased the FIE  rpm limiter relay along with the switch. The mag we have is joe hunt internal coil. Can We get a little help with the suggested point of connection for the positive and negative wires at the mag. The only external connection is the ground lug correct? In the flat bottom we never ran a limiter. Seemed like a good idea at the time! I guess?  Thank you

5

Front Engine Dragsters / wheelie bar

« on: March 05, 2018, 09:55:03 AM »

Looking for a starting point dimension for setting the wheelie bar of the pavement ? Have a 175" FED with a BBC 33X15X15 Rear tires. Also how many RPMS should we expect to spin during a burn out  w/5500 stall. Thank You

6

Front Engine Dragsters / crankcase evac

« on: November 21, 2017, 12:52:51 PM »

Is a vac pump the only option when running zoomies .
 

7

Front Engine Dragsters / Chiller Connection

« on: January 20, 2016, 07:01:57 AM »

First we are beginners. Just finished the car and we are building a chiller. Can we get a little help on connection? Do we connect input to each head an exit out the top of the manifold?