Topics

1

Drag Racing / Engine oil

« on: February 28, 2020, 01:28:26 AM »

Hi Guys, I really want as much imput as I can get. I have just built a 572 Keith Black Aluminum Chevy. I built it pretty much to mirror Reher and Morrisons 583 20 degree motor. My heads are Brodix BB2 + which are different, but everything else is pretty much the same. Reher and Morrison suggest using a syntheic 10w-30 motor oil.  I have used Mobil 1 for years in my trucks and cars with great suscess, but I am very interested in what you guys have to say.

2

Gassers / I need your help- Magneto kill switch circuit

« on: February 20, 2020, 08:13:07 PM »

Ok, So here is what I have. I will have a Mag kill switch in my cab on my switch panel, but then I will need another Kill switch at the back of my truck for emergency shut off. I was thinking of a series circuit. Hot side of the coil to the positive side of the kill switch in the cab. Negative side wire from that switch to the back switch hot side, and negative side of the back switch to motor for ground. This way if either switch is switched off it kills the mag. Any thoughts?   

3

Gassers / Foot braking, what works best for you guys?

« on: February 20, 2020, 01:14:36 AM »

I have always brought the rpm's up to where the truck or car wants to creep and then I bump in and hold it there until the light comes down.  I don't like flashing the converter too much as I have roasted the tires before, and that doesn't win too many races.   

4

Gassers / Parachutes? which one do you like and why?

« on: February 18, 2020, 04:05:26 PM »

Looking for the best chute for my truck, and I would love to have your opinion.

5

Gassers / How many of you guys run ANRA?

« on: February 13, 2020, 01:28:05 AM »

I can't wait to run at Sacramento and finally after all these years to run at Famoso.

6

Gassers / Just saying hello

« on: February 11, 2020, 02:13:40 PM »

Hi guys, I am new to the site. I found out about it through Fuel injection Ent. I have a 1958 Chevy apache 3100 step side truck. 572 Aluminum Keith black chevy, 90's pro stock tunnel ram, twin 1050 dominators, mallory super mag 3, 15:1 compression, brodix bb2 plus heads flowed and ported by EPD. Hughes custom built turbo 400, Alston cage, and back half, profab 9 inch rear end, 5:14 richmond gears and strange axles. I am hoping to run B or C gas depending on how fast the truck really is. It's been a 23 year project that I am hoping will be done by the first of april.