FrontEngineDragsters.Org Forum

Drag Racing Discussions => Altereds => Topic started by: 1000hpJohn on August 28, 2020, 01:37:22 PM

Title: Prism decal graphics wanted
Post by: 1000hpJohn on August 28, 2020, 01:37:22 PM

Hey all,
  I acquired a 32 Bantam altered and I am looking for that prism decal material that changes colors as it moves.
Anyone still have some of this stuff from the 70’s or newer stuff?  Decal was soo cool going down the tracks at night past the light poles...

Also, I can’t get the old glue off the body to save my butt... tried thinner, goo gone, wd40... I’m about to get the sander out and destroy a great paint job.
Any help is appreciated.

John

Title: Re: Prism decal graphics wanted
Post by: Calkins on August 28, 2020, 01:39:30 PM

Ask Dallas Brown from the AHRA.  He just found a source to do his decals.

(https://i.ebayimg.com/images/g/EBwAAOSwDSRcgrL8/s-l1600.jpg)

Title: Re: Prism decal graphics wanted
Post by: 1000hpJohn on August 28, 2020, 02:03:54 PM

YEAH THATS THE STUFF!!! ;D
Let me see if I can find him.

Is he on here much?

Title: Re: Prism decal graphics wanted
Post by: Calkins on August 28, 2020, 02:17:50 PM

https://ahraonline.com/contact/ (https://ahraonline.com/contact/)

Title: Re: Prism decal graphics wanted
Post by: 1000hpJohn on August 28, 2020, 04:25:23 PM

Thankyou Very much. 8)

Title: Re: Prism decal graphics wanted
Post by: denverflatheader on August 28, 2020, 05:07:14 PM

Try the 3M Eraser Wheel.  I've used it on a modern car and it works well, no paint damage.  Keep your speed down and keep moving over the glue.  Here's a link:

https://www.ebay.com/itm/3M-07498-STRIPE-OFF-WHEEL-ERASER-WHEEL-WITH-HARDWARE-3M-7498/231705997215?epid=1066556367&hash=item35f2c0ef9f:g:yHsAAOSw0HVWExP6

Title: Re: Prism decal graphics wanted
Post by: hotrodpete on August 29, 2020, 05:16:13 AM

Are you looking for a specific decal or sheets of material? I got 2 small rolls of it from E bay to do the side trim of an Impala. They had it up to 12 inches wide.

Title: Re: Prism decal graphics wanted
Post by: 1000hpJohn on September 03, 2020, 08:25:57 AM

Sheets of material I suppose.

I will try out that 3m stuff too and see if the glue comes off.
Thanks for the info guys.

Title: Re: Prism decal graphics wanted
Post by: 1000hpJohn on September 04, 2020, 10:04:06 AM

Got one of those glue Removal wheels and the dog gone thing works!!! :D
Thanks for the info Denverflatheader.