FrontEngineDragsters.Org Forum
Technical => Roo Man's Room => Topic started by: dgrossmann44 on February 10, 2020, 11:44:55 AM
-
Changing over to Mag and using FIE rev limiter with MSD SW & 2 step
1) can the Tach or shift light be run off the Crank trigger somehow? Or do we have to use a pulse signal activator.
2) In either case should we use solid core or suppression wires.
Thank You
Dennis
-
I ran mine off the trigger. if it can fire a 2 step, it's counting, so you can run the light off it too