FrontEngineDragsters.Org Forum

Social => Your Builds / Photo Gallery => Topic started by: masracingtd1167 on February 14, 2013, 01:01:10 PM

Title: Top Dragster Video
Post by: masracingtd1167 on February 14, 2013, 01:01:10 PM

http://www.youtube.com/watch?v=utiMPc0AQ0A

Title: Re: Top Dragster Video
Post by: Blind Mule on February 14, 2013, 02:38:53 PM

You beat me to it I was gonna put it on here ;D

   Randy!

Title: Re: Top Dragster Video
Post by: wideopen231 on February 15, 2013, 05:24:27 AM

Love watching the Viper Venom fuels car launch just plain pretty. Nice to see few FED's on out their.

Title: Re: Top Dragster Video
Post by: coupemerc on February 19, 2013, 02:43:56 PM

Cool video Bill. What engine combination are you running and who is that in the red FED? Thanks for posting.

Title: Re: Top Dragster Video
Post by: masracingtd1167 on February 24, 2013, 07:59:16 AM

Hi Chuck  My combo is a 3.625 stroke 4.155 bore to make 394 cubes Head's are an old set of 18 degree comp eliminator heads ported by Jimmy Bell Sheet metal intake with twin Terminator injection by Rons fuel injection .The car weigh's 1550 with me in it . It is not your typical FED combo but we wanted to run Division 1 Top Dragster wich I really enjoy so we had to step it up a little . The best we were running was 7.40's and we were having trouble Qualifying for these races so we installed a nitrous system on it ! This gave me a new goal and that was to run a 6 second run ! It took almost 3 years to get there . Alot of 7.0 runs and a lot of aborted passes ! We finally achieved our goal at the 2012 Dutch Classic at Maple Grove 6.94 at 191 . Now I HAVE TO FIND SOME NEW GOAL'S ! See you at the races ! Bill

Title: Re: Top Dragster Video
Post by: coupemerc on February 24, 2013, 02:53:12 PM

Thanks for the info Bill. You're probably 150 cubic inches smaller than most of those other T/Ds and just as quick. Pretty cool. Was your car an A/ND at any time? New goal should be clear...6.80!