FrontEngineDragsters.Org Forum
Technical => Jon's Wheel House => Topic started by: 1000hpJohn on September 06, 2020, 05:53:53 AM
-
OK, let’s get this party started. How do I tell what spindles I have on my 32 Bantam 125 inch altered chassis? Built at Advanced Chassis in the 80’s. I will call them Tuesday but thought maybe I could get the answer before then.
Any help is appreciated.
What’s the process to post a picture?
-
I found a little info . Should have done my homework before this post.
The spindles say CSPE on the top plate.
-
On the spindle, where the outer bearings ride just behind the axle nut, the Anglia is approximately .625 diameter, the Strange is .750 diameter.
-
Thanks draw3d, they are Anglia spindles.
Um, will you sell me your front wheels????
There the exact style I want. Anyone have a set for sale? The alum. Kind not the magnesium.
-
On the nut end dia .625" [5/8"] is Anglia, and .750" [3/4"] is Early Ford, the lenght are different too.
BTW as per NHRA wire spoke wheels are not allowed on alters or dragsters that over 1800 lbs [ no driver]
Jon Hansen, Hayden ent, 800-624-3803