FrontEngineDragsters.Org Forum

Technical => Roo Man's Room => Topic started by: George on July 06, 2017, 07:05:55 AM

Title: Mopar alloy 8 3/4 idenity ?
Post by: George on July 06, 2017, 07:05:55 AM

I have an alloy Mopar 8 3/4" housing. I expect is quite old. It broke and was replaced by an iron unit several years ago. It is stamped above the fill plug 61400 and 4661/ 2380. The 2380 may be 2390 as the stamp isn't quite complete. I would appreciate any information. Thank you. George

Title: Re: Mopar alloy 8 3/4 idenity ?
Post by: dreracecar on July 06, 2017, 08:17:05 AM

Pictures would help a lot
 Mickey Thompson made a mag one  and Donovan made an aluminum version
Numbers are not much help

Title: Re: Mopar alloy 8 3/4 idenity ?
Post by: George on July 06, 2017, 08:37:00 AM

I will try and get a picture posted . Thank you. Bruce