Author Topic: 2 speed shifter  (Read 4560 times)

Offline speedbump

  • Newbie
  • *
  • Posts: 16
    • View Profile
  • Your Best Time: n/a
  • Your Track: e-town lebbaon valley
  • Your Vehicle: fed
2 speed shifter
« on: May 16, 2014, 01:06:58 PM »
Hi, Looking for info. on obtaining a 2 speed rear exit elec. shifter for my fed with a power glide trans. want something small narrow and completely one handed operation. I plan on mounting this shifter to the side of my chassis not on or over the rear end. Looking for names of manufactures who i can contact. any help. tci  hurst etc. are to big. Thanks Mike

Offline jspell

  • Full Member
  • ***
  • Posts: 132
    • View Profile
  • Your Best Time: 7.48 / 178
  • Your Track: Maple Grove Raceway
  • Your Vehicle: 2014 Ken Keir Dragster
Re: 2 speed shifter
« Reply #1 on: May 16, 2014, 01:13:49 PM »
I have the Precision Performance shifter with electric solenoid, nice piece....one hand operation.  It's mounted with two studs off the frame.

Offline wideopen231

  • Hero Member
  • *****
  • Posts: 1594
    • View Profile
  • Your Best Time: 1/8 3.70@ 198 1/4 5.78@245
  • Your Engine: Hemi 526 ci alcohol
  • Your Track: Piedmont
  • Your Vehicle: 225 CMC FED
  • General Location: NORTH CAROLINA
Re: 2 speed shifter
« Reply #2 on: May 16, 2014, 01:52:25 PM »
Parks sells a nice tube shifter. I made one thats close but probably not as nice.Then I only have 10 bucks in it. got to get a electric solenoid for it. Wish I could find lighter weight one.
Relecting obama is like shooting right foot because it did not hurt enough when you shot left foot

Offline George

  • Hero Member
  • *****
  • Posts: 518
    • View Profile
  • Your Vehicle: 1964 Mercury Comet Super Stock/ M automatic
  • General Location: Midwest USA
Re: 2 speed shifter
« Reply #3 on: May 16, 2014, 03:08:07 PM »

Offline gregm784

  • Sr. Member
  • ****
  • Posts: 381
    • View Profile
    • Means Racing
  • Your Engine: 387 Dart/Brodix
  • Your Track: Famoso Raceway
  • Your Vehicle: 1997 Stirling 200" FED
Re: 2 speed shifter
« Reply #4 on: June 02, 2014, 03:39:15 PM »
I run an electric shift Quarter Pro. Great shifter. One handed operation too.
Greg
El Dorado County, CA
www.meansracing.com

Offline Totally T

  • Full Member
  • ***
  • Posts: 147
    • View Profile
    • NDRL
Re: 2 speed shifter
« Reply #5 on: July 14, 2014, 03:34:21 AM »
I have a old B-M that is the only one Ive ever saw...may be telling how old it is.. But I really like it. Shortys new car has a Aerospace Components shifter and if I was to ever need to switch it would be to that design.
Troy Wilson
Nostalgia Drag Racing League

Offline gregm784

  • Sr. Member
  • ****
  • Posts: 381
    • View Profile
    • Means Racing
  • Your Engine: 387 Dart/Brodix
  • Your Track: Famoso Raceway
  • Your Vehicle: 1997 Stirling 200" FED
Re: 2 speed shifter
« Reply #6 on: September 29, 2014, 04:03:57 PM »
I have a quarter pro for sale.  Electric shift, rear exit. 

Still looking?

email me, greg@meansracing.com
Greg
El Dorado County, CA
www.meansracing.com