Author Topic: 183" build for customer  (Read 15600 times)

Offline chassisman nz

  • Newbie
  • *
  • Posts: 4
    • View Profile
  • Your Track: Fram Autolite Dragway,Meremere,NZ
  • Your Vehicle: Building a 183"FED
183" build for customer
« on: April 27, 2014, 10:17:47 PM »
Here's some shots take last year of a customers project,Wayne is his name,hails from Gisborne here in New Zealand,(6 hour drive from my shop),based on a Dave Tuttle design with some of Waynes changes,the car is back for finishing,(steering,new front axle,chute mount,etc then back to Wayne for tinwork,will post more as progress continues,
Terry
Terry's Chassis Shoppe on Facebook

dreracecar

  • Guest
Re: 183" build for customer
« Reply #1 on: April 28, 2014, 09:27:26 AM »
Nice,
The only thing that wont fly here in the States is that the rear end mounting plates must be welded not only to the uprite, but to the upper and lower framerails also, welding to the K-member tubes does not accomplish this. May pass or may not pass by your cert guy

Offline Nightmare AA/FA

  • Full Member
  • ***
  • Posts: 166
    • View Profile
  • Your Track: Bakersfield, CA
  • Your Vehicle: 1934 Ford AA/FA
Re: 183" build for customer
« Reply #2 on: April 28, 2014, 09:30:20 AM »
Looks like you have a lot of projects in your shop.

Offline GlennLever

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2058
    • View Profile
    • The Lever Family Site
  • Your Best Time: 1/4 mile 7.950 at 165 MPH
  • Your Engine: Pontiac 461 Alky Blown
  • Your Track: Empire Dragway, NY
  • Your Vehicle: Front Engine Dragster
Re: 183" build for customer
« Reply #3 on: April 28, 2014, 02:50:06 PM »
Some pretty welds.
Glenn R. Lever
Rochester, New York 14617-2012
My Cars https://www.lever-family-racing.com/

Offline chassisman nz

  • Newbie
  • *
  • Posts: 4
    • View Profile
  • Your Track: Fram Autolite Dragway,Meremere,NZ
  • Your Vehicle: Building a 183"FED
Re: 183" build for customer
« Reply #4 on: May 16, 2014, 10:47:44 PM »
'My work here is done' the rolling frame is now finished,(inc mods to rear uprights :))Wayne is travelling from Gisborne on Monday,6 hour drive,to take home & build body work,here's some shots taken in the 'departure' lounge 8),
Cheers Terry
Terry's Chassis Shoppe on Facebook

dreracecar

  • Guest
Re: 183" build for customer
« Reply #5 on: May 17, 2014, 11:45:13 AM »
While a very nice build I have 2 questions

1) shoulder harness belt attachment, seems to be a lot of extra stuff and belt length where as wraping the belt around the 1" tube would accomplish the same purpose.
2) haveing the chute anchor sticking out from the spine bar would cause injury if the car ever backed itself into the wall and if the chute ever pulled the uprite out of the chassie it would take the shoulder belts with it.

Offline chassisman nz

  • Newbie
  • *
  • Posts: 4
    • View Profile
  • Your Track: Fram Autolite Dragway,Meremere,NZ
  • Your Vehicle: Building a 183"FED
Re: 183" build for customer
« Reply #6 on: May 17, 2014, 04:24:29 PM »
thanks for your input,
Terry's Chassis Shoppe on Facebook

Offline FredsSpeedShop

  • Newbie
  • *
  • Posts: 6
    • View Profile
  • Your Engine: Ford 440 FE
  • Your Track: MMP
  • Your Vehicle: FED project
Re: 183" build for customer
« Reply #7 on: April 24, 2016, 02:12:48 PM »
Nearly finished

Offline FredsSpeedShop

  • Newbie
  • *
  • Posts: 6
    • View Profile
  • Your Engine: Ford 440 FE
  • Your Track: MMP
  • Your Vehicle: FED project
Re: 183" build for customer
« Reply #8 on: November 18, 2017, 12:32:22 AM »
Finally at the track! The forum has been a great help in building this car. Thanks

Offline arush

  • Jr. Member
  • **
  • Posts: 59
    • View Profile
  • Your Engine: Blown-Alcohol-Injected 427 BBC
  • Your Track: Thompson Raceway Park
  • Your Vehicle: King Chassis 160" FED
  • General Location: Pa.
Re: 183" build for customer
« Reply #9 on: November 18, 2017, 05:50:56 AM »
Sweet looking ride.

Offline Paul New

  • Hero Member
  • *****
  • Posts: 745
    • View Profile
  • Your Best Time: 6.47 @ 214 MPH SBC
  • Your Engine: 387" SBC
  • Your Track: Woodburn Dragstrip
  • Your Vehicle: 2005 FED
Re: 183" build for customer
« Reply #10 on: November 18, 2017, 08:43:34 AM »
That is a beautiful car! Great job!

Offline coupemerc

  • Sr. Member
  • ****
  • Posts: 307
    • View Profile
  • Your Best Time: 3.86@188 (1/8 Mile), 5.97@233 (1/4 Mile)
Re: 183" build for customer
« Reply #11 on: November 18, 2017, 08:47:53 AM »
Yes, it looks beautiful. How is it running? Nice job!

Offline FredsSpeedShop

  • Newbie
  • *
  • Posts: 6
    • View Profile
  • Your Engine: Ford 440 FE
  • Your Track: MMP
  • Your Vehicle: FED project
Re: 183" build for customer
« Reply #12 on: November 18, 2017, 04:54:45 PM »
Thanks. We have only done some licensing passes so far but everything worked and it went straight and pulled up good. The last run went 5.2 @119 at 1/2 track. The only thing that was a concern was that it pulls forward a bit when in neutral. What is a normal idle rpm?

Offline coupemerc

  • Sr. Member
  • ****
  • Posts: 307
    • View Profile
  • Your Best Time: 3.86@188 (1/8 Mile), 5.97@233 (1/4 Mile)
Re: 183" build for customer
« Reply #13 on: November 19, 2017, 05:17:43 AM »
My idle is about 2500 RPM and there are specific reasons for that. I don't know your combination but you probably don't want or need your idle that high. There's a pretty good thread on this site (maybe Spud's area?) that gets into idle speeds a bit. The car should not creep at all in neutral. Is it a powerglide? With a brake? Check your shift linkage adjustment, your high clutch may be applied or your low band is stuck. You probably want to post that question on Dan Dishon's Den. Good luck...cool car!

Offline THE FRENCHTOWN FLYER

  • Sr. Member
  • ****
  • Posts: 360
    • View Profile
  • Your Best Time: 8.28@168 door; 9.00@147 6-cyl alt; 8.53@160 RED
  • Your Engine: 300 Ford six NA w/ crossflow and prod. heads
  • Your Track: Milan, Thompson
  • Your Vehicle: (3) Advanced Chassis altered , The Last Logghe altered, '30 RPU
  • General Location: North Coast
Re: 183" build for customer
« Reply #14 on: November 19, 2017, 08:29:45 AM »
My altereds creep when the oil is cold - usually a foot against the front tire will stop them. When they warm up it mostly disappears so I attribute it to drag on the pump and internal rotating pieces, with maybe a little mis-alignment at the block plates. Mine idle at 1800 in neutral. It hasn't affected trans life or so it seems to me.