« previous next »
Pages: [1]   Go Down

Author Topic: Blower snout lengths  (Read 4072 times)

Offline buickfed

  • Full Member
  • ***
  • Posts: 191
    • View Profile
Blower snout lengths
« on: February 01, 2014, 01:59:27 PM »
since I run a 350 buick, all intakes are homemade. I am trying to put on a 4-71 Hampton blower on the engine. but I have to push the blower way forward to get by front section.
Do they make longer snouts and are they all interchangeable?

john
Logged

dreracecar

  • Guest
Re: Blower snout lengths
« Reply #1 on: February 01, 2014, 03:14:25 PM »
RCD Engineering
Logged

Offline 32bantam

  • Full Member
  • ***
  • Posts: 117
    • View Profile
    • SS3 Race Team
  • Your Best Time: 6.87 at BG 2013 aiming for 7.0
  • Your Track: Empire Dragway, NY
  • Your Vehicle: 32 Bantam altered
Re: Blower snout lengths
« Reply #2 on: February 05, 2014, 02:23:16 AM »
They come from 3" to 8+.  You will need the appropriate coupler for the length. You can find them used on e-bay and some racing chat rooms. If you are making an adapter plate you can find where you want the blower to go.....get the snout length you need and then if it ends up an odd size you can move the blower position a bit with the adapter.
Steve   
Logged
Steve Walczak
Pages: [1]   Go Up
« previous next »