Author Topic: fuel door  (Read 3862 times)

Offline ss4

  • Jr. Member
  • **
  • Posts: 98
    • View Profile
  • Your Best Time: 5.42 @ 128 - 1/8th
  • Your Track: Northern Michigan Dragway
  • Your Vehicle: Worm Inc. 180 inch Front Engine Dragster
fuel door
« on: December 18, 2013, 11:46:10 AM »
Okay so here is my next stumbling block.  Looking for examples on adding a fuel door on the fiberglass body.  Just want to see some trick thoughts on having it blend into the body.  or a trick way of putting fuel in with out removing the body.
if you need to Hate target Laziness

Offline GlennLever

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2058
    • View Profile
    • The Lever Family Site
  • Your Best Time: 1/4 mile 7.950 at 165 MPH
  • Your Engine: Pontiac 461 Alky Blown
  • Your Track: Empire Dragway, NY
  • Your Vehicle: Front Engine Dragster
Re: fuel door
« Reply #1 on: December 18, 2013, 02:06:31 PM »
I remove the body after each pass
Glenn R. Lever
Rochester, New York 14617-2012
My Cars https://www.lever-family-racing.com/

dreracecar

  • Guest
Re: fuel door
« Reply #2 on: December 18, 2013, 02:53:59 PM »
Some vendors sell access door kits, but a problem you might encounter is that if the door opening and recess was not part of the original 'glass, cutting an opening might allow the body to shift and move when the sun hits it and things start to expand whereas aluminum doesnt. one takes their chances