Author Topic: What did you do on your Front Engine Dragster TODAY?  (Read 807498 times)

Offline masracingtd1167

  • Hero Member
  • *****
  • Posts: 1138
  • bill masiello Shelton Ct.
    • View Profile
  • Your Best Time: 7.40's at 181 on motor 6.94 at 192 nitrous
  • Your Engine: 394 chevy
  • Your Track: Lebanon Valley Dragway
  • Your Vehicle: 2003 Neil and Parks
Re: What did you do on your Front Engine Dragster TODAY?
« Reply #1020 on: March 11, 2017, 04:41:55 AM »
Yes 2017

Offline mrmopartech

  • Newbie
  • *
  • Posts: 49
    • View Profile
  • Your Best Time: 8.82 1/4
  • Your Engine: 451 moparRB
  • Your Track: napierville dragway
  • Your Vehicle: 1988 rear engine dragster
  • General Location: montreal quebec eastcoast
Re: What did you do on your Front Engine Dragster TODAY?
« Reply #1021 on: April 01, 2017, 06:33:39 AM »
Today we start to rebuild back together the FED after having the chassic stripped and powered coated,and the front and rear wheels.We have upped the HP to 510 at the motor with some good carb tuning and jetting and header tuning while on the dyno.New air induction,shift pionts,hotter ignition system,should also help,mrmopartech

Offline blake

  • Newbie
  • *
  • Posts: 6
    • View Profile
  • Your Best Time: 3 cars. 7.78: 7.20: 5.96 1/4 mile
  • Your Engine: 2 cars Chev, 3rd car Hemi
  • Your Track: Sydney Dragway
  • Your Vehicle: FED
  • General Location: Australia
Re: What did you do on your Front Engine Dragster TODAY?
« Reply #1022 on: April 02, 2017, 04:24:08 PM »
Just trying to figure out how the forum works.

Offline GlennLever

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2058
    • View Profile
    • The Lever Family Site
  • Your Best Time: 1/4 mile 7.950 at 165 MPH
  • Your Engine: Pontiac 461 Alky Blown
  • Your Track: Empire Dragway, NY
  • Your Vehicle: Front Engine Dragster
Re: What did you do on your Front Engine Dragster TODAY?
« Reply #1023 on: April 03, 2017, 09:14:27 AM »
Your doing well.
Glenn R. Lever
Rochester, New York 14617-2012
My Cars https://www.lever-family-racing.com/

Offline Oldschool

  • Full Member
  • ***
  • Posts: 122
    • View Profile
  • Your Best Time: 8.42 in a BB Chevy Altered 9.28 in my Vega
  • Your Engine: 434 Scott Shafiroff Racing Engine
  • Your Track: US 36 , Mo Kan and Heartland Park Topeka
  • Your Vehicle: 173" Front Engine Dragster
Re: What did you do on your Front Engine Dragster TODAY?
« Reply #1024 on: April 11, 2017, 04:48:07 PM »
Well,started piecing together my Enderle injection system. This is a whole new ballgame for me and should be interesting. I am going to send it out and have it set up.
It is not the years in your life
But the life in your years

Offline GlennLever

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2058
    • View Profile
    • The Lever Family Site
  • Your Best Time: 1/4 mile 7.950 at 165 MPH
  • Your Engine: Pontiac 461 Alky Blown
  • Your Track: Empire Dragway, NY
  • Your Vehicle: Front Engine Dragster
Re: What did you do on your Front Engine Dragster TODAY?
« Reply #1025 on: April 11, 2017, 05:41:28 PM »
 :)
Glenn R. Lever
Rochester, New York 14617-2012
My Cars https://www.lever-family-racing.com/

Offline Roger

  • Full Member
  • ***
  • Posts: 185
    • View Profile
  • Your Vehicle: 125 inch Altered
Re: What did you do on your Front Engine Dragster TODAY?
« Reply #1026 on: April 11, 2017, 07:15:07 PM »
The learning curve for alky injection gets steep real quick when you start from the beginning. Fortunately there are a lot of knowledgeable folks here on the site that are willing to answer your questions. I’d never run injection or alcohol before and wouldn’t have been able to run my junior fueler without the help and advice of some good people here and elsewhere. And you’ll probably find this new set-up interesting and challenging. It’s the challenge that makes it fun!

Offline FEDNV

  • Jr. Member
  • **
  • Posts: 99
    • View Profile
  • Your Best Time: 7.65 @ 175mph - 1/4
  • Your Engine: 560 BBC
  • Your Track: Sacramento
  • Your Vehicle: 185" FED
Re: What did you do on your Front Engine Dragster TODAY?
« Reply #1027 on: April 25, 2017, 11:24:05 AM »
Trying out some mufflers to see if it helps the performance any over zoomies.


Offline ricardo1967

  • Hero Member
  • *****
  • Posts: 578
    • View Profile
  • Your Best Time: No full pass yet.
  • Your Engine: Alky SBC 400
  • Your Track: Brown County Dragway (Bean Blossom, IN)
  • Your Vehicle: 173" FED
Re: What did you do on your Front Engine Dragster TODAY?
« Reply #1028 on: April 25, 2017, 01:57:30 PM »
Trying out some mufflers to see if it helps the performance any over zoomies.


Sacrilege!  :o

Offline FEDNV

  • Jr. Member
  • **
  • Posts: 99
    • View Profile
  • Your Best Time: 7.65 @ 175mph - 1/4
  • Your Engine: 560 BBC
  • Your Track: Sacramento
  • Your Vehicle: 185" FED
Re: What did you do on your Front Engine Dragster TODAY?
« Reply #1029 on: April 25, 2017, 06:33:50 PM »
That's what I said too but everyone is telling me these will pick up some HP.  Going to give it a try.  Sounds like a SC dragster with them on.  Still bringing my zoomies to the track LOL
https://goo.gl/photos/efy5E7QJHh6v1RG37

Offline Roger

  • Full Member
  • ***
  • Posts: 185
    • View Profile
  • Your Vehicle: 125 inch Altered
Re: What did you do on your Front Engine Dragster TODAY?
« Reply #1030 on: April 26, 2017, 10:00:52 AM »
Should be an interesting performance comparison between headers & zoomies, especially with an engine as big as yours. Alan Ellis put zoomies on his A/AA along with an automatic trans this year and set the national record. Other than the classes that require zoomies, I never thought I'd see a record holding n/a comp car with zoomies.

dreracecar

  • Guest
Re: What did you do on your Front Engine Dragster TODAY?
« Reply #1031 on: April 26, 2017, 02:14:02 PM »
Horsepower VS weight

Offline Roger

  • Full Member
  • ***
  • Posts: 185
    • View Profile
  • Your Vehicle: 125 inch Altered
Re: What did you do on your Front Engine Dragster TODAY?
« Reply #1032 on: April 26, 2017, 03:22:28 PM »
Alan projected that zoomies would provide downward thrust for the car. The actual weight difference was only 10 lbs between the two exhaust systems, but the additional downforce allowed him to lighten the front of the car by 40 lbs. Downforce vs weight.

Offline JrFuel Hayden

  • Hero Member
  • *****
  • Posts: 600
    • View Profile
    • Hayden Enterprises Speciality Wheels
  • Your Best Time: 6.02, 236 mph, 1/4 in 1973 Div 3 TF Champ
  • Your Engine: SBC, Alky, 403 ci, Best 6.99 @ 190 & 409 Hemi
  • Your Track: Bakersfield
  • Your Vehicle: 225" FED NHRA Heritage Jr Fuel
Re: What did you do on your Front Engine Dragster TODAY?
« Reply #1033 on: April 26, 2017, 05:53:39 PM »
Ellis runs a Gray Motorsport Pro Stock motor on gas, does that mean we'll see Pro Stocks running zoomies next ?
Jon C. Hansen

Hayden Wheels

Offline hemidakota

  • Full Member
  • ***
  • Posts: 210
    • View Profile
  • Your Best Time: 7.69 @ 173.5mph
  • Your Engine: 510 B1MC Wedge
  • Your Track: sacramento raceway
  • Your Vehicle: 02 200" fed
  • General Location: west coast
Re: What did you do on your Front Engine Dragster TODAY?
« Reply #1034 on: April 26, 2017, 06:13:29 PM »
I am interested in the tune up changes we will have to do from zoomies to headders. Will see this weekend.
If it jams force it, if it breaks it needed replaced anyways