Author Topic: Revival of old FED project  (Read 3702 times)

Offline Dolmetsch

  • Sr. Member
  • ****
  • Posts: 348
    • View Profile
  • Your Best Time: dont bother with times anyome (last 4 years) just
  • Your Engine: 225 slant six Dodge . 246 cubes on 94 octane
  • Your Track: Picton Airfield
  • Your Vehicle: The Senior Dragster
Revival of old FED project
« on: July 07, 2013, 06:26:17 AM »
Sitting in my shop back in the corner is an old new FED project I stalled on. It is at the tacked together stage which is good for nothing. (cant sell, cant use) Everytime I walk into the shop to work on the gasser it is looking at me. I am thinking maybe it is time to fire up the scratch tig, get a bottle of gas and some quality rod and finish the welding. Probably a couple of days would do it. I donno. Tis tempting me. Here it is sitting with a flat tire. Seems a shame. Will take any A series Mopar with a 727 trans. I built it for a hot 318 poly project but I dont think I have the hair to drive it with that. My driving skills are not what they once were and they were never very good anyway.  Maybe a good running stock 318 or 340 will turn up.
SR Dragster, because old people need to have fun too!