Author Topic: Front end stagger  (Read 4301 times)

Offline wideopen231

  • Hero Member
  • *****
  • Posts: 1910
    • View Profile
  • Your Best Time: 1/8 3.70@ 198 1/4 5.78@245
  • Your Engine: Hemi 526 ci alcohol
  • Your Track: Piedmont
  • Your Vehicle: 225 CMC FED
  • General Location: NORTH CAROLINA
Front end stagger
« on: May 17, 2013, 05:54:27 PM »
 Just getting ready to install spindles and wondering if everyone runs the allowed 2" stagger on frontend.I know in headsup it help but not sure about withy bracket deal. Also any differance in right or left for wheel that moved reaward?
Relecting obama is like shooting right foot because it did not hurt enough when you shot left foot

Offline rooman

  • Moderator
  • Hero Member
  • *****
  • Posts: 559
    • View Profile
  • Your Best Time: 6.200/222.05 (1/4 mile--NT/F)
Re: Front end stagger
« Reply #1 on: May 18, 2013, 01:36:41 PM »
I usually don't build stagger into my cars but if I do the left wheel should always be the leader. If the car torques up at launch the left will always be the first to leave the ground and hopefully that will leave the right wheel in the beam just a little longer.

Roo
Yeah, I am from the south--any further south and I would have been a bloody penguin.