Author Topic: DAS AUTO Gasser  (Read 7140 times)

Offline Dolmetsch

  • Sr. Member
  • ****
  • Posts: 348
    • View Profile
  • Your Best Time: dont bother with times anyome (last 4 years) just
  • Your Engine: 225 slant six Dodge . 246 cubes on 94 octane
  • Your Track: Picton Airfield
  • Your Vehicle: The Senior Dragster
DAS AUTO Gasser
« on: May 13, 2013, 04:21:58 AM »
Over the weekend I received Free a VW bug body. I have lots of spare slant six engines trans & parts and decided to whip up a gasser chassis. 4 corner 1/4 eliptics with ladder bars. What to call it? For me there is no question. "DAS AUTO mit Kreizler Kraft" Always wanted a gassser coupe.
Don
SR Dragster, because old people need to have fun too!

Offline GlennLever

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2058
    • View Profile
    • The Lever Family Site
  • Your Best Time: 1/4 mile 7.950 at 165 MPH
  • Your Engine: Pontiac 461 Alky Blown
  • Your Track: Empire Dragway, NY
  • Your Vehicle: Front Engine Dragster
Re: DAS AUTO Gasser
« Reply #1 on: May 13, 2013, 05:43:22 AM »
Take us along for the ride in the build thread.
Glenn R. Lever
Rochester, New York 14617-2012
My Cars https://www.lever-family-racing.com/

Offline Dolmetsch

  • Sr. Member
  • ****
  • Posts: 348
    • View Profile
  • Your Best Time: dont bother with times anyome (last 4 years) just
  • Your Engine: 225 slant six Dodge . 246 cubes on 94 octane
  • Your Track: Picton Airfield
  • Your Vehicle: The Senior Dragster
Re: DAS AUTO Gasser
« Reply #2 on: May 13, 2013, 04:08:25 PM »
Will do.
Don
SR Dragster, because old people need to have fun too!

Offline GlennLever

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2058
    • View Profile
    • The Lever Family Site
  • Your Best Time: 1/4 mile 7.950 at 165 MPH
  • Your Engine: Pontiac 461 Alky Blown
  • Your Track: Empire Dragway, NY
  • Your Vehicle: Front Engine Dragster
Re: DAS AUTO Gasser
« Reply #3 on: May 13, 2013, 05:02:44 PM »
Glenn R. Lever
Rochester, New York 14617-2012
My Cars https://www.lever-family-racing.com/

Offline Dolmetsch

  • Sr. Member
  • ****
  • Posts: 348
    • View Profile
  • Your Best Time: dont bother with times anyome (last 4 years) just
  • Your Engine: 225 slant six Dodge . 246 cubes on 94 octane
  • Your Track: Picton Airfield
  • Your Vehicle: The Senior Dragster
Re: DAS AUTO Gasser
« Reply #4 on: May 28, 2013, 12:09:36 PM »
Over the last two days I have been working also on the gasser chassis. Why no pics? Because the metal was given to me free but it is a bit scuzy looking. Cleans up good with a quick pass with a flap wheel but tis not pretty as received so I will picture the frame when it is finsihed welding and I have had a chance to remove the old scuzy painted surface.  It is excellant metal. 2X3 X .180"+ Even a bit stronger then required. So far I have built the lower frame and front crossmember. The frame style is a Honda H . Tapered from front to rear with wideness at rear. Dimensions are arrived at by using the MT VW Bug body shell and laying it out on the garage floor to make sure it would all work out. Today I made the kick ups for over the ladder bars and springs. Then do not taper like the frame in front of them but go back square. Rear will be 30 inch ladder bars with an unnarrowed Jeep rear end. Front end will be quarter eliphtics with a homebrew tube axle . I am still looking for spindles that will hold a modern set of brakes . Cant make the king pin bosses in the lathe till I know the length and bore size. I E Handi van or Dodge A100 or early Econoline. I prefer building axles with Handi Van spindles. Whatever shows up available for the right price. (FREE") will get the nod if it is suitable. In fact you should know so far my cost has been $0. I have a/6 engine , trans core, body and all frame steel free. The straight tube axle tube is a piece I had left over from a Jeep Altered build a few years ago. I needed 35 inches in length and it turned out to be 36". It is 2 inch heavy wall round  tubing I have used before. 
Anyway as soon as the basic frame is finish welded up and buffed I will picture it.
Don
« Last Edit: May 28, 2013, 12:43:53 PM by Dolmetsch »
SR Dragster, because old people need to have fun too!

Offline Dolmetsch

  • Sr. Member
  • ****
  • Posts: 348
    • View Profile
  • Your Best Time: dont bother with times anyome (last 4 years) just
  • Your Engine: 225 slant six Dodge . 246 cubes on 94 octane
  • Your Track: Picton Airfield
  • Your Vehicle: The Senior Dragster
Re: DAS AUTO Gasser
« Reply #5 on: May 29, 2013, 10:54:55 AM »
Started a build thread with pics
Don
SR Dragster, because old people need to have fun too!