Drag Racing Discussions > Front Engine Dragsters

Clutch can blow back struts

(1/1)

gordon:
Changing out the after market PG trans for Lenco two spd and clutch. Any of you guys have good pix of how the blow back struts were done on your chassis ? I know there are 16 ways to skin a cat and the cat is not fond of any of them , at the same time I don't want to reinvent the wheel is some one has a good  one that rolls well .

gregm784:
Hey Gordon, i have a couple pictures i'll send you via text.  Pretty slick, easy to work on ideas.  I still need to add them to mine.......

gordon:
Thanks Greg , Id love to see them.

wideopen231:
On A/Fue;l car we have a sleeve sitting over upright and the blowback bolted to two tabes welded to it. I pull two quick  pins and rotate to the side pull the clutch.

Navigation

[0] Message Index