Author Topic: New, Unused Dragster Axle  (Read 1706 times)

Offline lake_harley

  • Sr. Member
  • ****
  • Posts: 261
    • View Profile
  • Your Best Time: 7.06 @99.58 - 1/8 mi.
  • Your Engine: Carbureted, gas mild 305 Chevy
  • Your Track: Jeffers Motorsports Park - Sikeston, MO
  • Your Vehicle: 145" FED
  • General Location: SE Missouri
New, Unused Dragster Axle
« on: November 26, 2023, 02:37:47 PM »
New dragster axle for aftermarket spindles. After I bought this axle I found out the kingpin bosses were too long for my original Anglia spindles. Center-to center kingpin width is 44". Drop is 4.5" measured from the top of the kingpin boss to top of axle tube center portion. Kingpin inclination as best as I can tell using a digital level is 8 degrees.

Location is Southeast Missouri. Price is $225 plus actual shipping.

Photos available via text. (573) 286-3335

Lynn Winter

Offline lake_harley

  • Sr. Member
  • ****
  • Posts: 261
    • View Profile
  • Your Best Time: 7.06 @99.58 - 1/8 mi.
  • Your Engine: Carbureted, gas mild 305 Chevy
  • Your Track: Jeffers Motorsports Park - Sikeston, MO
  • Your Vehicle: 145" FED
  • General Location: SE Missouri
Re: New, Unused Dragster Axle
« Reply #1 on: December 05, 2023, 07:19:32 PM »
I had a request for a bit more info so thought I'd add it. The axle tube is 1.5"  Wall thickness unknown but I would expect 3/16" (.188"). Kingpin bosses are 2" tall and the kingpin hole according to my dial caliper is 11/16" (.688")

Lynn

Offline lake_harley

  • Sr. Member
  • ****
  • Posts: 261
    • View Profile
  • Your Best Time: 7.06 @99.58 - 1/8 mi.
  • Your Engine: Carbureted, gas mild 305 Chevy
  • Your Track: Jeffers Motorsports Park - Sikeston, MO
  • Your Vehicle: 145" FED
  • General Location: SE Missouri
Re: New, Unused Dragster Axle
« Reply #2 on: December 11, 2023, 05:34:39 AM »
SOLD
« Last Edit: December 18, 2023, 10:44:20 AM by lake_harley »