Anyone running higher trans gear(lower number) and lower rear gear(higher number ? My thinking is it will ease hit at starting line tq wise while allowing for lower top end gearing to give it extra ump to pull last 1/4 of track. Not really concerned about top end rpm. In my case the motor use to turn 10.5k with a blower, so a few hundred extra NA, extra being above 8000 or 8500 rpm is no biggy. Plus 99% of runs will be 1/8 mile.
I did have some input from ol guy in Kansas about trans gear and was told do not run 1.80 low. Yea I am not lkeaving at 9200 rpm, but figure TQ with bigger crank will make up for that.Maybe wrong. What are you running.If known weight and HP please.