Technical > Spud Miller's Cave
Injection recommendation??
tcoupekyle:
I gotcha I mean with a 75cc head I'm still at 12.2. those numbers will change when I actually have a set of heads and can really measure. But this piece of information makes me comfortable in buying a head with a big chamber vs. buying Pistons to lower compression.
tcoupekyle:
Cam record? On this sorta thing?
Paul New:
--- Quote from: tcoupekyle on January 13, 2021, 04:23:20 AM ---Paul,
Man everywhere else I see people saying with a blower not to run compression over 12. This block is zero decked and I have a set of 2 eyebrow flat tops. I was thinking I'd have to buy new Pistons because it seems even with a 72cc head my compression yields 12 something to 1.
--- End quote ---
Oh xxxx I read this way to fast and missed the 6-71 part yes do not go that high my bad!!!
I run 10.5-1 on my 387” AJPE SBC. I would stay in that range you have a pretty large tuning window. I do know when I was running 23 degree stuff I ran up to 11.2-1. My old canted valve 387” was 10.5-1 also Greg Means ran this combo and I believe he still has the heads and intake for sale they make big power real easy.
Paul New:
How quick are you wanting to go? I have always run pretty similar grinds 280-292@.050 114LC and anywhere from .720 to .780 lift
tcoupekyle:
Awesome! What's he asking for the setup?
The big block had 1000hp I'd like to be around as much as I can make with this. 😂😂😂
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version