Author Topic: Can a mild steel FED get certified to 7.50  (Read 3160 times)

Offline Flakenstein

  • Newbie
  • *
  • Posts: 2
    • View Profile
  • Your Best Time: 9.30.....1/4
  • Your Engine: have several cars
  • Your Track: Bryon / Rt 66
  • Your Vehicle: 2FED and an Gasser from 65
  • General Location: midwest
Can a mild steel FED get certified to 7.50
« on: August 31, 2020, 04:16:04 PM »
Hi everybody. I recently purchased a 225`` FED, I bought it for the drivetrain. This car was built with mild steel, tubing sizes and thickness are all correct. They did a nice job on the construction of the car. My question is can this car be certified to run slower than7.50 ? Im just looking to take it out every now and then and have a little fun ....It doesn't have to be extremely fast..... Thanks for your help !

Offline Finnish Fireball

  • Jr. Member
  • **
  • Posts: 87
    • View Profile
  • Your Best Time: 4.69 / 147 mph 1/8 mile
  • Your Engine: 540 cid BBC 8-71 Hampton e85
  • Your Track: Kauhava
  • Your Vehicle: Fireball Slingshot
  • General Location: Finland
Re: Can a mild steel FED get certified to 7.50
« Reply #1 on: August 31, 2020, 11:28:32 PM »
Sure it can, why not. Mine just got fresh 7.50 tag last month. SFI has many variables based on FED construction style and what the various tubing sizes needs to be in each version of them.
I'm fast. I can make five mistakes while others think.

Offline Flakenstein

  • Newbie
  • *
  • Posts: 2
    • View Profile
  • Your Best Time: 9.30.....1/4
  • Your Engine: have several cars
  • Your Track: Bryon / Rt 66
  • Your Vehicle: 2FED and an Gasser from 65
  • General Location: midwest
Re: Can a mild steel FED get certified to 7.50
« Reply #2 on: September 01, 2020, 05:25:40 PM »
Thanks Finnish Fireball, I thought it could but took a lot of razzing when I bought it. Quite a few people from a FED page on FB said I could never get it certified because it was mild steel . I just noticed you race in Finland ? I wonder if the rules are the same in the states ......
« Last Edit: September 01, 2020, 08:10:31 PM by Flakenstein »

Offline Finnish Fireball

  • Jr. Member
  • **
  • Posts: 87
    • View Profile
  • Your Best Time: 4.69 / 147 mph 1/8 mile
  • Your Engine: 540 cid BBC 8-71 Hampton e85
  • Your Track: Kauhava
  • Your Vehicle: Fireball Slingshot
  • General Location: Finland
Re: Can a mild steel FED get certified to 7.50
« Reply #3 on: September 01, 2020, 10:35:48 PM »
We utilize the exact same NHRA and SFI foundation rulebooks and specs here.

I'm fast. I can make five mistakes while others think.

Offline BK

  • Sr. Member
  • ****
  • Posts: 311
    • View Profile
  • Your Best Time: 8.45 / 5.30
  • Your Track: Empire Dagway
  • Your Vehicle: Late 70's FED
Re: Can a mild steel FED get certified to 7.50
« Reply #4 on: September 03, 2020, 08:05:27 PM »
If it meets the spec it certifies. IHRA rule book lists both Chrome Moly and Mild Steel as acceptable materials.
Depending on how slow you may not need a cert.
Slower than 9.00 in the quarter, 6.00 in the eighth or under 150 you dont need a cert for IHRA>

Offline Paul New

  • Hero Member
  • *****
  • Posts: 745
    • View Profile
  • Your Best Time: 6.47 @ 214 MPH SBC
  • Your Engine: 387" SBC
  • Your Track: Woodburn Dragstrip
  • Your Vehicle: 2005 FED
Re: Can a mild steel FED get certified to 7.50
« Reply #5 on: September 04, 2020, 09:37:30 AM »
I have been meaning to look at my SFI spec to verify.