Author Topic: Prism decal graphics wanted  (Read 1579 times)

Offline 1000hpJohn

  • Jr. Member
  • **
  • Posts: 68
    • View Profile
  • Your Best Time: 8.70/154mph
  • Your Track: Norwalk, Milan Dragway
  • Your Vehicle: 8 sec. ElCamino
Prism decal graphics wanted
« on: August 28, 2020, 01:37:22 PM »
Hey all,
  I acquired a 32 Bantam altered and I am looking for that prism decal material that changes colors as it moves.
Anyone still have some of this stuff from the 70ís or newer stuff?  Decal was soo cool going down the tracks at night past the light poles...

Also, I canít get the old glue off the body to save my butt... tried thinner, goo gone, wd40... Iím about to get the sander out and destroy a great paint job.
Any help is appreciated.

John

Offline Calkins

  • Jr. Member
  • **
  • Posts: 57
  • On Any Sunday
    • View Profile
  • Your Best Time: 1/8th Mile - 5.77 @ 117
  • Your Track: Humboldt, IA - North Iowa Dragway
  • General Location: Midwest
Re: Prism decal graphics wanted
« Reply #1 on: August 28, 2020, 01:39:30 PM »
Ask Dallas Brown from the AHRA.  He just found a source to do his decals.

Justin Calkins - Iowa Falls, Iowa

Offline 1000hpJohn

  • Jr. Member
  • **
  • Posts: 68
    • View Profile
  • Your Best Time: 8.70/154mph
  • Your Track: Norwalk, Milan Dragway
  • Your Vehicle: 8 sec. ElCamino
Re: Prism decal graphics wanted
« Reply #2 on: August 28, 2020, 02:03:54 PM »
YEAH THATS THE STUFF!!! ;D
Let me see if I can find him.

Is he on here much?

Offline Calkins

  • Jr. Member
  • **
  • Posts: 57
  • On Any Sunday
    • View Profile
  • Your Best Time: 1/8th Mile - 5.77 @ 117
  • Your Track: Humboldt, IA - North Iowa Dragway
  • General Location: Midwest
Re: Prism decal graphics wanted
« Reply #3 on: August 28, 2020, 02:17:50 PM »
Justin Calkins - Iowa Falls, Iowa

Offline 1000hpJohn

  • Jr. Member
  • **
  • Posts: 68
    • View Profile
  • Your Best Time: 8.70/154mph
  • Your Track: Norwalk, Milan Dragway
  • Your Vehicle: 8 sec. ElCamino
Re: Prism decal graphics wanted
« Reply #4 on: August 28, 2020, 04:25:23 PM »
Thankyou Very much. 8)

Offline denverflatheader

  • Sr. Member
  • ****
  • Posts: 314
    • View Profile
Re: Prism decal graphics wanted
« Reply #5 on: August 28, 2020, 05:07:14 PM »
Try the 3M Eraser Wheel.  I've used it on a modern car and it works well, no paint damage.  Keep your speed down and keep moving over the glue.  Here's a link:

https://www.ebay.com/itm/3M-07498-STRIPE-OFF-WHEEL-ERASER-WHEEL-WITH-HARDWARE-3M-7498/231705997215?epid=1066556367&hash=item35f2c0ef9f:g:yHsAAOSw0HVWExP6

Offline hotrodpete

  • Newbie
  • *
  • Posts: 44
    • View Profile
  • Your Best Time: 9.8@138
  • Your Engine: Early hemi
  • Your Track: none
  • Your Vehicle: Rooman Fiat altered
  • General Location: Orillia, Ontario
Re: Prism decal graphics wanted
« Reply #6 on: August 29, 2020, 05:16:13 AM »
Are you looking for a specific decal or sheets of material? I got 2 small rolls of it from E bay to do the side trim of an Impala. They had it up to 12 inches wide.

Offline 1000hpJohn

  • Jr. Member
  • **
  • Posts: 68
    • View Profile
  • Your Best Time: 8.70/154mph
  • Your Track: Norwalk, Milan Dragway
  • Your Vehicle: 8 sec. ElCamino
Re: Prism decal graphics wanted
« Reply #7 on: September 03, 2020, 08:25:57 AM »
Sheets of material I suppose.

I will try out that 3m stuff too and see if the glue comes off.
Thanks for the info guys.

Offline 1000hpJohn

  • Jr. Member
  • **
  • Posts: 68
    • View Profile
  • Your Best Time: 8.70/154mph
  • Your Track: Norwalk, Milan Dragway
  • Your Vehicle: 8 sec. ElCamino
Re: Prism decal graphics wanted
« Reply #8 on: September 04, 2020, 10:04:06 AM »
Got one of those glue Removal wheels and the dog gone thing works!!! :D
Thanks for the info Denverflatheader.