Author Topic: durometer reading on tires  (Read 4055 times)

Offline wideopen231

  • Hero Member
  • *****
  • Posts: 1910
    • View Profile
  • Your Best Time: 1/8 3.70@ 198 1/4 5.78@245
  • Your Engine: Hemi 526 ci alcohol
  • Your Track: Piedmont
  • Your Vehicle: 225 CMC FED
  • General Location: NORTH CAROLINA
durometer reading on tires
« on: April 05, 2020, 12:53:23 PM »
Was just checking tires on car to see if any change in durometer reading. Got me wondering what reading on other brands are.My M/T are 50 average reading and fairly new run wise. I know few have said they had problem getting wheel speed with Mickeys.Thinking maybe harder compound works better for some.

Anyone who check durometer reading on tires from time to time .Please chime in with info on whats working or not working for you.
Relecting obama is like shooting right foot because it did not hurt enough when you shot left foot

Offline JrFuel Hayden

  • Hero Member
  • *****
  • Posts: 600
    • View Profile
    • Hayden Enterprises Speciality Wheels
  • Your Best Time: 6.02, 236 mph, 1/4 in 1973 Div 3 TF Champ
  • Your Engine: SBC, Alky, 403 ci, Best 6.99 @ 190 & 409 Hemi
  • Your Track: Bakersfield
  • Your Vehicle: 225" FED NHRA Heritage Jr Fuel
Re: durometer reading on tires
« Reply #1 on: June 20, 2020, 12:34:32 AM »
I have used a durometer when I 1'st started racing JF but that was because we were using a tire softener treatment , which we have not used in about 16 years since the tracks are doing a better job of track prep, more VHT and track dragging . Also slick suppiers don't offer much options of compounds, unless you go to another size tire. I think my durometer reading were hig 40's -low 50's.
I can check my current tires if that will help you.
Jon 
Jon C. Hansen

Hayden Wheels

Offline wideopen231

  • Hero Member
  • *****
  • Posts: 1910
    • View Profile
  • Your Best Time: 1/8 3.70@ 198 1/4 5.78@245
  • Your Engine: Hemi 526 ci alcohol
  • Your Track: Piedmont
  • Your Vehicle: 225 CMC FED
  • General Location: NORTH CAROLINA
Re: durometer reading on tires
« Reply #2 on: June 21, 2020, 06:47:07 AM »
Just looking for comparisons and how many runs or time before change and what effect a little change might or might not make. Mine run low 50's most all the way across new and keeping record on changes. Never too much info,if you know how to use it and don't screw yourself.
Relecting obama is like shooting right foot because it did not hurt enough when you shot left foot

Offline JrFuel Hayden

  • Hero Member
  • *****
  • Posts: 600
    • View Profile
    • Hayden Enterprises Speciality Wheels
  • Your Best Time: 6.02, 236 mph, 1/4 in 1973 Div 3 TF Champ
  • Your Engine: SBC, Alky, 403 ci, Best 6.99 @ 190 & 409 Hemi
  • Your Track: Bakersfield
  • Your Vehicle: 225" FED NHRA Heritage Jr Fuel
Re: durometer reading on tires
« Reply #3 on: July 08, 2020, 12:31:13 AM »
My GY guy has suggested replacing the tires when the 60' times change with no combination change , when I asked how many runs or what age I should change to new.
Jon C. Hansen

Hayden Wheels

Offline wideopen231

  • Hero Member
  • *****
  • Posts: 1910
    • View Profile
  • Your Best Time: 1/8 3.70@ 198 1/4 5.78@245
  • Your Engine: Hemi 526 ci alcohol
  • Your Track: Piedmont
  • Your Vehicle: 225 CMC FED
  • General Location: NORTH CAROLINA
Re: durometer reading on tires
« Reply #4 on: July 08, 2020, 05:07:23 PM »
No combination change? Now that I am trying to focus on bracket racing I know most don't change much. I figure to still test ideas for better performance,but following the rule on one at a time .If don't work change back should be no issue.

 My question is how many times do folks like Jon make ten passes w/o some kind of change in tune up?
Relecting obama is like shooting right foot because it did not hurt enough when you shot left foot