Author Topic: Wheelie Bar net  (Read 3300 times)

Offline MikenMpls

  • Jr. Member
  • **
  • Posts: 80
    • View Profile
  • Your Engine: 408 dart little m block and Iron Eagle heads
  • Your Track: Cameron, MO
  • Your Vehicle: 205" FED
Wheelie Bar net
« on: January 19, 2020, 08:46:27 AM »
I need a "longer than commercially available" wheelie bar net in the triangle shape. I have reached out to two companies and both apparently do not want to make one. Has anyone here had one made? If so which company did the net? Thanks!

Offline THE FRENCHTOWN FLYER

  • Sr. Member
  • ****
  • Posts: 360
    • View Profile
  • Your Best Time: 8.28@168 door; 9.00@147 6-cyl alt; 8.53@160 RED
  • Your Engine: 300 Ford six NA w/ crossflow and prod. heads
  • Your Track: Milan, Thompson
  • Your Vehicle: (3) Advanced Chassis altered , The Last Logghe altered, '30 RPU
  • General Location: North Coast
Re: Wheelie Bar net
« Reply #1 on: January 19, 2020, 01:26:08 PM »
Any shop that makes boat awnings / flying bridges / covers / etc has the capability to sew nylon webbing. I would just go to Harbor Freight or equivalent, buy a bunch of webbing as used on ratchet straps, lay the pattern out on a piece of cardboard and ask them to sew it together. For additional fire resistance you could soak it in a borax solution.

Offline Paul New

  • Hero Member
  • *****
  • Posts: 745
    • View Profile
  • Your Best Time: 6.47 @ 214 MPH SBC
  • Your Engine: 387" SBC
  • Your Track: Woodburn Dragstrip
  • Your Vehicle: 2005 FED
Re: Wheelie Bar net
« Reply #2 on: January 19, 2020, 04:33:25 PM »
Pretty sure DJ Safety can set you up.

Offline gregm784

  • Sr. Member
  • ****
  • Posts: 384
    • View Profile
    • Means Racing
  • Your Engine: 365" GenIV SBC
  • Your Track: Famoso Raceway
  • Your Vehicle: 1997 Stirling 200" FED
Re: Wheelie Bar net
« Reply #3 on: January 20, 2020, 09:09:19 AM »
I gave Ben Conant a call @ DJ, told them how long i wanted it, how wide at the top & how wide at the bottom.  A couple days later a bitchen net showed up in a box.  :)  great service.
Greg
El Dorado County, CA
www.meansracing.com

Offline MikenMpls

  • Jr. Member
  • **
  • Posts: 80
    • View Profile
  • Your Engine: 408 dart little m block and Iron Eagle heads
  • Your Track: Cameron, MO
  • Your Vehicle: 205" FED
Re: Wheelie Bar net
« Reply #4 on: January 21, 2020, 04:52:31 PM »
Thanks for the referral's!

Offline noslin

  • Sr. Member
  • ****
  • Posts: 259
    • View Profile
  • Your Best Time: 0.00
  • Your Engine: none
  • Your Track: none
  • Your Vehicle: none
  • General Location: west coast
Re: Wheelie Bar net
« Reply #5 on: January 22, 2020, 07:26:50 PM »
stroud made mine and was quick about it.

Offline MikenMpls

  • Jr. Member
  • **
  • Posts: 80
    • View Profile
  • Your Engine: 408 dart little m block and Iron Eagle heads
  • Your Track: Cameron, MO
  • Your Vehicle: 205" FED
Re: Wheelie Bar net
« Reply #6 on: March 01, 2020, 10:34:53 AM »
Just as you said one call to DJ Safety and it was a done deal! Can't thank you guys for the suggestion and Big Ben at DJ Safety enough for the service. I now have a great fitting wheelie bar net and will not stress out about the chute getting hung up on the bars...