Drag Racing Discussions > Drag Racing

Old worn out blower vs brand new stripped Littlefield

<< < (2/2)

gregm784:

--- Quote from: Paul New on October 14, 2019, 10:07:56 AM ---I would hold it out to 1000’

--- End quote ---

It would be a better heat reading huh.

I'll pay attention to make sure it doesn't lay over until then. :)

Paul New:
Yes at least 800’

gregm784:
Headed out Saturday.

First pull went about 10 inches and lit the tires.  Bar to high, and dead hooked on a tight track.

Second pull went to 1000 feet. 7.79/131.  but 4.806/145.5 at the split.  Works out to a 7.48'ish

Third pull was clean, but i slowed it down to much, 7.89/169 (dead rich after another pulley swap to slow it down)

Jet area is now 0.017016. Had an 80 main (no HS). 6.67gpm pump. plugs are dead cold, car ran GREAT. New blower ended up 10 under, making 13.5-14#s.

Plugs in picture have 3 hits on them. Oil is clean, and motor is happy. Looking forward to ANRA (Famoso) November 8-10.

Navigation

[0] Message Index

[*] Previous page