Drag Racing Discussions > Drag Racing

New to supercharging, need some pointers

<< < (5/6) > >>

jeff/21:
 Cometic  MLS worked with the motors we built we had smooth block and heads but wouldn't work on a motor we bought that had a rougher surface didn't realize the problem until after o-ringing   cometic  has or will make any bore size or thickness had some strange stuff made.

jaded13640:
excellent, thanks Jeff. Maybe I am going to be o-ringing this pain in my butt.

Wayne

dreracecar:
Too many issues had with the Cometic and SBC (surfaces prepped as needed) went back to copper and an o-ring- problems solved

jaded13640:
Yea....son of a bird dawg... This is prove more complicated than parts selection. That's all building 500 strokers was about, and lost of clearancing for aluminum rods. I guess I'll be talking to the machinist that's going to bore it for us to cut the grooves in the deck. Dang it! LOL

Again, ANYONE knowing about a used hemi blower intake, please let me know.

Thanks for everything so far,

Wayne

jeff/21:
I get my copper gaskets form Cometic

Navigation

[0] Message Index

[#] Next page

[*] Previous page