Author Topic: Early hemi block cleaning prior to Moroso block filling  (Read 2693 times)

Offline Merryknees

  • Newbie
  • *
  • Posts: 25
    • View Profile
  • Your Best Time: 7.90 / 170mph 1/4mile
  • Your Engine: blown methanol 392 hemi
  • Your Track: Jurby, isle of man
  • Your Vehicle: 39 Topolino + 41 Willys coupe
  • General Location: Isle of Man UK
Early hemi block cleaning prior to Moroso block filling
« on: May 02, 2019, 12:18:48 PM »
I am about to clean a 392 hemi block of all the internal water jacket rust prior to Moroso block filling.
My question is -
Has anyone used OXALIC ACID to clean a early hemi block of all the rust in the water jackets? If so please can you advise the ratio acid to water and approx time scale.
I intend to fully submurge the block in the liquid.
As I am on the Isle of Man, there is no professional service locally to carry out the task
thanks

Offline THE FRENCHTOWN FLYER

  • Sr. Member
  • ****
  • Posts: 360
    • View Profile
  • Your Best Time: 8.28@168 door; 9.00@147 6-cyl alt; 8.53@160 RED
  • Your Engine: 300 Ford six NA w/ crossflow and prod. heads
  • Your Track: Milan, Thompson
  • Your Vehicle: (3) Advanced Chassis altered , The Last Logghe altered, '30 RPU
  • General Location: North Coast
Re: Early hemi block cleaning prior to Moroso block filling
« Reply #1 on: May 02, 2019, 03:11:27 PM »
I haven't used Oxalyic acid, but I have used electrolisis for smaller items. There are some youtube videos of guys using a tub with water/baking soda solution and a battery charger to de-rust blocks.

Is there a drag strip on the Isle of Man? Where do you have to go to race?
I've watched the IoM TT bike races - Holy Cow!! Those guys are wild.

Offline gtpete

  • Newbie
  • *
  • Posts: 25
    • View Profile
  • Your Best Time: none
  • Your Engine: none
  • Your Track: Santa Pod
  • Your Vehicle: FED
  • General Location: Northamptonshire
Re: Early hemi block cleaning prior to Moroso block filling
« Reply #2 on: May 14, 2019, 02:09:15 AM »
Hello. I use a place in Leicester to dip blocks. They come out like new ready for building. give me a call if you want their number. Pete 07593 424777.

Offline Merryknees

  • Newbie
  • *
  • Posts: 25
    • View Profile
  • Your Best Time: 7.90 / 170mph 1/4mile
  • Your Engine: blown methanol 392 hemi
  • Your Track: Jurby, isle of man
  • Your Vehicle: 39 Topolino + 41 Willys coupe
  • General Location: Isle of Man UK
Re: Early hemi block cleaning prior to Moroso block filling
« Reply #3 on: May 14, 2019, 12:23:21 PM »
Hello. I use a place in Leicester to dip blocks. They come out like new ready for building. give me a call if you want their number. Pete 07593 424777.

Thanks for the info Pete. Just waiting on the block to arrive over here [Isle of Man] then work begins. That patch of water between us and Leicester is the problem though.
I have some Evaporust + lots of pokey things so hopefully with a bit of graft I will be able to get the thing cleaned ready to fill witn Moroso block filled then it's away to Andy Mapes for the machining before assemble and back on the track for Dragstalgia.
Eeverything crossed that all goes well.

Offline gtpete

  • Newbie
  • *
  • Posts: 25
    • View Profile
  • Your Best Time: none
  • Your Engine: none
  • Your Track: Santa Pod
  • Your Vehicle: FED
  • General Location: Northamptonshire
Re: Early hemi block cleaning prior to Moroso block filling
« Reply #4 on: May 16, 2019, 11:49:57 PM »
No problem mate. I'll come over and say hello when your at the Pod. Cheers Pete.