Author Topic: Style oil filter  (Read 2959 times)

Offline grapro

  • Jr. Member
  • **
  • Posts: 71
    • View Profile
  • Your Track: edmonton
  • Your Vehicle: 184" FED
Style oil filter
« on: February 17, 2019, 08:40:27 AM »
I was just wondering what style of filtering system or oil filter type and make everyone uses in there alcohol engines. Had a couple of oiling system problems in the past and don't want that mistake again.

Offline 421Altered

  • Newbie
  • *
  • Posts: 17
    • View Profile
  • Your Best Time: 5.09 in 1/8th
  • Your Engine: alky injected 421sbc
  • Your Track: Adel, Ga.
  • Your Vehicle: 125" Altered
  • General Location: South Georgia
Re: Style oil filter
« Reply #1 on: February 17, 2019, 09:17:12 AM »
I use a spin on Napa Gold 1061 in my alky sbc, makes about 60 psi, no problems.

Offline jeff/21

  • Full Member
  • ***
  • Posts: 186
    • View Profile
  • Your Best Time: 8.24
  • Your Track: any with-in a 6hr radius
  • Your Vehicle: fed
Re: Style oil filter
« Reply #2 on: February 17, 2019, 09:30:49 AM »
406 SBC ALKY  wey sump Wix spin-on racing filter, 500 BBC blown alky OBERG inline filter dry sump

Offline msundstrom

  • Full Member
  • ***
  • Posts: 120
    • View Profile
  • Your Best Time: 7.45 @ 182 in 1/4
  • Your Engine: NA Injected 505 BBC on 45%
  • Your Track: Woodburn Dragstrip
  • Your Vehicle: FED
  • General Location: Washington Coast
Re: Style oil filter
« Reply #3 on: February 17, 2019, 11:20:20 AM »
I use an Oberg, you can catch many things when they are small before they become catastrophic.

Offline wideopen231

  • Hero Member
  • *****
  • Posts: 1910
    • View Profile
  • Your Best Time: 1/8 3.70@ 198 1/4 5.78@245
  • Your Engine: Hemi 526 ci alcohol
  • Your Track: Piedmont
  • Your Vehicle: 225 CMC FED
  • General Location: NORTH CAROLINA
Re: Style oil filter
« Reply #4 on: February 17, 2019, 02:21:43 PM »
Always ran Oberg.
Relecting obama is like shooting right foot because it did not hurt enough when you shot left foot

Offline Paul New

  • Hero Member
  • *****
  • Posts: 745
    • View Profile
  • Your Best Time: 6.47 @ 214 MPH SBC
  • Your Engine: 387" SBC
  • Your Track: Woodburn Dragstrip
  • Your Vehicle: 2005 FED
Re: Style oil filter
« Reply #5 on: February 17, 2019, 03:16:45 PM »
I ran a Wix 51061 for years on my race cars.  I would still be using a 51061 on my car except I changed to a dry sump oil system with a Peterson inline filter

Offline glofria

  • Full Member
  • ***
  • Posts: 139
    • View Profile
  • Your Best Time: 7.323 @ 185.05
  • Your Engine: A blown 388 c.i. Small Block Chevy
  • Your Track: Auto Club Famoso Raceway
  • Your Vehicle: An original 1957 Chevy Bel-Air
  • General Location: Southern California
Re: Style oil filter
« Reply #6 on: February 18, 2019, 10:45:10 AM »
We have Oberg filters on all or engines. Using the filter after the dry sump pump.

Only complaint is that it is messy when we check it after every run. The excess oil will spill out as you take it apart.

Offline JrFuel Hayden

  • Hero Member
  • *****
  • Posts: 600
    • View Profile
    • Hayden Enterprises Speciality Wheels
  • Your Best Time: 6.02, 236 mph, 1/4 in 1973 Div 3 TF Champ
  • Your Engine: SBC, Alky, 403 ci, Best 6.99 @ 190 & 409 Hemi
  • Your Track: Bakersfield
  • Your Vehicle: 225" FED NHRA Heritage Jr Fuel
Re: Style oil filter
« Reply #7 on: February 18, 2019, 06:09:44 PM »
We run an inline cleanable Peterson filter, works great for the last 10 years, we only need to check it after the race.
Jon C. Hansen

Hayden Wheels