Author Topic: TB battery  (Read 2182 times)

Offline retroboy

  • Full Member
  • ***
  • Posts: 221
    • View Profile
  • Your Track: Whyalla
  • Your Vehicle: FED
TB battery
« on: January 18, 2019, 03:01:33 AM »
I've heard of people using drill batteries but what the ?? I'm looking for info on how my power a Transbrake uses. Current draw (Amps?) I have a battery retailer not far away that has 12V  batteries that are externally the size of a cigarette pack. What do I need ?
Cheers






Offline wideopen231

  • Hero Member
  • *****
  • Posts: 1910
    • View Profile
  • Your Best Time: 1/8 3.70@ 198 1/4 5.78@245
  • Your Engine: Hemi 526 ci alcohol
  • Your Track: Piedmont
  • Your Vehicle: 225 CMC FED
  • General Location: NORTH CAROLINA
Re: TB battery
« Reply #1 on: January 18, 2019, 05:28:19 AM »
 Not sure about amp draw,but think any 12v will work.I know Neil and Parks sale a piece that allows you to run drill battery.
Relecting obama is like shooting right foot because it did not hurt enough when you shot left foot

Offline denverflatheader

  • Sr. Member
  • ****
  • Posts: 332
    • View Profile
Re: TB battery
« Reply #2 on: January 18, 2019, 07:03:41 AM »
The TB like all solenoids merely changes electric energy to mechanical force.  Differing volts and watts help determine the amp output for your selected battery. Knowing your amp need helps select your battery.

Most TB will need between 8 to 10 amps dependent on the battery volts and watts specifications.  More amps (aka current) flowing through the TB generates more heat, which simultaneously increases ohms (aka resistance) and this resistance lowers the current so your TB is not as powerful.

For example the Dewalt Flexvolt tool battery DCB612 has the following specifications:  20V/60V maximum, 240 watts, 12 amp hour.

At 240 watts / 20 volts = 12 amp hour
At 240 watts / 60 volts = 4 amp hour

In answer to your question, you need your TB volt and amp hour needs.  For example, the TB specification sheet may state:  Maximum current draw:  8 amps at 12.5 volts DC

And although the Dewalt DCB612 tool battery example will work, it would be overkill for your TB needs at 12.5 volts.  Alan