Author Topic: Camera  (Read 4734 times)

Offline Rat

  • Jr. Member
  • **
  • Posts: 65
    • View Profile
  • Your Best Time: 8.585 @ 154.55
  • Your Engine: Stack Injected All Iron 392 Chrysler Hemi
  • Your Track: Willowbank Raceway, Queensland, Australia
  • Your Vehicle: Colthup Bros FED
  • General Location: Australia - East Coast
Camera
« on: January 10, 2019, 10:04:09 PM »
Just wondering what brand, resolution, lens angle camera you are using onboard. Will be back in the seat after a long layoff and thought I might get a camera, initially to critique my driving.

Offline Rat

  • Jr. Member
  • **
  • Posts: 65
    • View Profile
  • Your Best Time: 8.585 @ 154.55
  • Your Engine: Stack Injected All Iron 392 Chrysler Hemi
  • Your Track: Willowbank Raceway, Queensland, Australia
  • Your Vehicle: Colthup Bros FED
  • General Location: Australia - East Coast
Re: Camera
« Reply #1 on: February 12, 2019, 01:27:00 AM »
 :( So no one is using a cheaper option to a GoPro.
 ;D All good, glad to see everyone is focused on the important Go Fast stuff.

Offline 421Altered

  • Newbie
  • *
  • Posts: 17
    • View Profile
  • Your Best Time: 5.09 in 1/8th
  • Your Engine: alky injected 421sbc
  • Your Track: Adel, Ga.
  • Your Vehicle: 125" Altered
  • General Location: South Georgia
Re: Camera
« Reply #2 on: February 13, 2019, 07:43:26 AM »
I'm using an SJ4000.  I'm electronics challenged, but, I'm able to use it.  I've used it in the cockpit, and videoing the launch.  Seems to work well, but, I can't find out how to remotely turn it on.  Maybe it doesn't have one?

Offline Paul New

  • Hero Member
  • *****
  • Posts: 745
    • View Profile
  • Your Best Time: 6.47 @ 214 MPH SBC
  • Your Engine: 387" SBC
  • Your Track: Woodburn Dragstrip
  • Your Vehicle: 2005 FED
Re: Camera
« Reply #3 on: February 13, 2019, 01:06:30 PM »
I’ve ran a couple of Go Pros and a Replay Camera I broke the Go Pros from tire shake the Replay I only used it one weekend then the season was over and never brought it out again

Offline Rat

  • Jr. Member
  • **
  • Posts: 65
    • View Profile
  • Your Best Time: 8.585 @ 154.55
  • Your Engine: Stack Injected All Iron 392 Chrysler Hemi
  • Your Track: Willowbank Raceway, Queensland, Australia
  • Your Vehicle: Colthup Bros FED
  • General Location: Australia - East Coast
Re: Camera
« Reply #4 on: February 14, 2019, 03:34:29 AM »
Thanks guys, I have found a supplier for the SJ4000 here in Aust.

Offline JrFuel Hayden

  • Hero Member
  • *****
  • Posts: 600
    • View Profile
    • Hayden Enterprises Speciality Wheels
  • Your Best Time: 6.02, 236 mph, 1/4 in 1973 Div 3 TF Champ
  • Your Engine: SBC, Alky, 403 ci, Best 6.99 @ 190 & 409 Hemi
  • Your Track: Bakersfield
  • Your Vehicle: 225" FED NHRA Heritage Jr Fuel
Re: Camera
« Reply #5 on: February 14, 2019, 11:16:26 AM »
We have used a GoPro for over 5 years , yes we had tire shake issues too until we built an alum mount to replace GoPro plastic mount. We mounted on the rear top of our roll bar , far enough out of the way so our driver didn't bump it when getting in and out of the car. The mount we made was mounted to the chute mount . Yes we lost the GoPro with the plastic mount. It helps us look at the driver actions, and how we do down track . We also use a hand held video camera to see what's going on at the start. One thing we look at is wheelie bar tracks and another thing we found was the right slick was being hit harder because of engine torque, so we now put 1/4-1/2 lb more tire pressure in the right tire to help it run straight. If we have long tracks on the track from the wheelie bar we put a liitle more lead on the nose, to help balance the car.
I hope this helps.
Jon
Jon C. Hansen

Hayden Wheels

Offline JrFuel Hayden

  • Hero Member
  • *****
  • Posts: 600
    • View Profile
    • Hayden Enterprises Speciality Wheels
  • Your Best Time: 6.02, 236 mph, 1/4 in 1973 Div 3 TF Champ
  • Your Engine: SBC, Alky, 403 ci, Best 6.99 @ 190 & 409 Hemi
  • Your Track: Bakersfield
  • Your Vehicle: 225" FED NHRA Heritage Jr Fuel
Re: Camera
« Reply #6 on: February 14, 2019, 01:12:17 PM »
If anyone wants to see a few of our videos , our crew member that is in charge of the GoPro and Video camera just posted some 2018 CHRR  runs on the JrFuel Dragster Association FB. Click on the left side on "posts" then click on the right side on Jeff Hook and the date to see the videos. You can also go to utube and click on Hook J11 for 250 videos of our car and Steve Phillips NITRO VW FED.
We will post more when we have time.
HAVE fUN !
Jon C. Hansen

Hayden Wheels

Offline Paul New

  • Hero Member
  • *****
  • Posts: 745
    • View Profile
  • Your Best Time: 6.47 @ 214 MPH SBC
  • Your Engine: 387" SBC
  • Your Track: Woodburn Dragstrip
  • Your Vehicle: 2005 FED
Re: Camera
« Reply #7 on: February 14, 2019, 07:23:05 PM »
Just an fyi my go pro didn’t break the mount I built an aluminum one also but I damaged the electronics inside mine I had some pretty brutal shake for awhile

Offline dusterdave173

  • Hero Member
  • *****
  • Posts: 638
    • View Profile
  • Your Best Time: 5.38in 1/8th
  • Your Engine: 355 CI SBC
  • Your Track: Mooresville, NC
  • Your Vehicle: CenPen 200 inch FED
Re: Camera
« Reply #8 on: February 15, 2019, 07:11:58 AM »
Replay Mini used to be all over the web for $125 few years back now hard to find
Mine worked fine--when it quit working you just erase the card and away you go--tough little unit--used at pawn shops they are cheap  more natural angle of view------ GOPRO is wide angle---
The camera helped me learn if it was ME or the CAR when runs did not go right or...when they did  Big Help when starting out --after a year or so you just quit filming and run the car
Would not start out without a camera---mount where it shows hands and steering wheel and front wheels--will teach you a ton!
I have always had a fascination with fast cars at the expense of more normal character development

Offline JrFuel Hayden

  • Hero Member
  • *****
  • Posts: 600
    • View Profile
    • Hayden Enterprises Speciality Wheels
  • Your Best Time: 6.02, 236 mph, 1/4 in 1973 Div 3 TF Champ
  • Your Engine: SBC, Alky, 403 ci, Best 6.99 @ 190 & 409 Hemi
  • Your Track: Bakersfield
  • Your Vehicle: 225" FED NHRA Heritage Jr Fuel
Re: Camera
« Reply #9 on: February 15, 2019, 09:18:47 PM »
Paul how did you fix your tire shake ?
Jon
Jon C. Hansen

Hayden Wheels

Offline Paul New

  • Hero Member
  • *****
  • Posts: 745
    • View Profile
  • Your Best Time: 6.47 @ 214 MPH SBC
  • Your Engine: 387" SBC
  • Your Track: Woodburn Dragstrip
  • Your Vehicle: 2005 FED
Re: Camera
« Reply #10 on: February 15, 2019, 10:53:50 PM »
Air up helped but the final fix was a clutch pedal and B&J