Author Topic: ford 9 inch rear end  (Read 611 times)

Offline sandhopper2

  • Newbie
  • *
  • Posts: 32
    • View Profile
  • Your Best Time: none
  • Your Engine: vw 1915 turbo
  • Your Track: none
  • Your Vehicle: 205" RED
  • General Location: west coast
ford 9 inch rear end
« on: December 04, 2018, 09:47:41 AM »
Looking for a Ford 9" rear for a rear engine dragster project , or maybe someone that can shorten the one I have . I'm is Socal so loacl is best

Offline tdracer

  • Newbie
  • *
  • Posts: 17
    • View Profile
  • Your Best Time: 6.90 1/4 (RED) 4.71 1/8 (FED)
  • Your Engine: SBC Supercharged alky 400cid
  • Your Track: Various
  • Your Vehicle: Dragsters front and rear engined
Re: ford 9 inch rear end
« Reply #1 on: December 10, 2018, 06:46:48 AM »
I have a 9" floater out of a RED, Braced housing,  complete, brakes, hats, MW steel center section, axles, gears and male coupler half. Not Local (Detroit) but it may be worth you getting it trucked.

Shoot me an email or text and i will get you some pics.  519-919-3929  brian.peeters@gmail.com

Offline sandhopper2

  • Newbie
  • *
  • Posts: 32
    • View Profile
  • Your Best Time: none
  • Your Engine: vw 1915 turbo
  • Your Track: none
  • Your Vehicle: 205" RED
  • General Location: west coast
Re: ford 9 inch rear end
« Reply #2 on: December 29, 2018, 09:54:38 AM »
thanks TDracer , I'm on a very limited budget
I have found the Jig to shorten the housing so really looking for just the 31 spline axles
I have a center with spool and a new disk brake steup and don't want to resell that stuff

Offline hemidakota

  • Full Member
  • ***
  • Posts: 186
    • View Profile
  • Your Best Time: 7.69 @ 173.5mph
  • Your Engine: mopar wedge
  • Your Track: sacramento raceway
  • Your Vehicle: 02 206" fed
  • General Location: west coast
Re: ford 9 inch rear end
« Reply #3 on: December 30, 2018, 07:00:33 AM »
I have a brand new set of strange 31 spline axles and new center section with 4.10 gears, Daytona pinion support and spool. Upgraded to 40 spline. Will try to get axle measurements today and post.
If it jams force it, if it breaks it needed replaced anyways

Offline dreracecar

  • Hero Member
  • *****
  • Posts: 1615
    • View Profile
  • Your Track: Bakersfield
  • Your Vehicle: 7-0 pro dragster
Re: ford 9 inch rear end
« Reply #4 on: December 31, 2018, 08:19:01 AM »
Sent you a PM
just down the Fwy in Gardena
$425
« Last Edit: December 31, 2018, 08:22:42 AM by dreracecar »

Offline sandhopper2

  • Newbie
  • *
  • Posts: 32
    • View Profile
  • Your Best Time: none
  • Your Engine: vw 1915 turbo
  • Your Track: none
  • Your Vehicle: 205" RED
  • General Location: west coast
Re: ford 9 inch rear end
« Reply #5 on: January 05, 2019, 05:13:48 PM »
I have a brand new set of strange 31 spline axles and new center section with 4.10 gears, Daytona pinion support and spool. Upgraded to 40 spline. Will try to get axle measurements today and post.
Did you get the measurements and any idea of your price ?