Author Topic: FTI pg valve body  (Read 3862 times)

Offline wideopen231

  • Hero Member
  • *****
  • Posts: 1910
    • View Profile
  • Your Best Time: 1/8 3.70@ 198 1/4 5.78@245
  • Your Engine: Hemi 526 ci alcohol
  • Your Track: Piedmont
  • Your Vehicle: 225 CMC FED
  • General Location: NORTH CAROLINA
FTI pg valve body
« on: November 15, 2018, 11:11:23 PM »
I have a FTI built valve body for powerglide.Setup for hi/lo transbake also pro brake.To clarify hi/lo is where you can leave off transbrake in low(regular) or if want can leave off brake in high gear. Advantages are basically its a option if want or need. Pro brake reacts quicker,but does require TB button to be held while using reverse. Normally cost right at 300 asking$220 shipped to your door. Used very little. I just want to get same  thing but aluminum version just for 8 lbs savings  and spend more money doing so.
Relecting obama is like shooting right foot because it did not hurt enough when you shot left foot

Offline BK

  • Sr. Member
  • ****
  • Posts: 311
    • View Profile
  • Your Best Time: 8.45 / 5.30
  • Your Track: Empire Dagway
  • Your Vehicle: Late 70's FED
Re: FTI pg valve body
« Reply #1 on: November 16, 2018, 08:30:06 PM »
I think there was I thread on this but too lazy to look it up.
Any idea what the reaction time difference is between leaving in high vs. low?
I realize there's a lot of variables just trying to get an idea.
I,m interested just not sure its the way I want to go.
Is the soleniod included?
« Last Edit: November 16, 2018, 08:42:27 PM by BK »

Offline wideopen231

  • Hero Member
  • *****
  • Posts: 1910
    • View Profile
  • Your Best Time: 1/8 3.70@ 198 1/4 5.78@245
  • Your Engine: Hemi 526 ci alcohol
  • Your Track: Piedmont
  • Your Vehicle: 225 CMC FED
  • General Location: NORTH CAROLINA
Re: FTI pg valve body
« Reply #2 on: November 17, 2018, 01:16:17 PM »
RT wise no I know its almost dead on .5 difference et wise. You can call Greg at FTI he will know difference. I think I read .o5 difference in high,but double check it.
Relecting obama is like shooting right foot because it did not hurt enough when you shot left foot

Offline wideopen231

  • Hero Member
  • *****
  • Posts: 1910
    • View Profile
  • Your Best Time: 1/8 3.70@ 198 1/4 5.78@245
  • Your Engine: Hemi 526 ci alcohol
  • Your Track: Piedmont
  • Your Vehicle: 225 CMC FED
  • General Location: NORTH CAROLINA
Re: FTI pg valve body
« Reply #3 on: November 20, 2018, 07:55:16 AM »
$200 shipped lower 48
Relecting obama is like shooting right foot because it did not hurt enough when you shot left foot

Offline opa1

  • Full Member
  • ***
  • Posts: 155
    • View Profile
  • Your Best Time: 5:60 1/8
  • Your Engine: 355 Chevy Methanol Injected
  • Your Track: Alamo City Motorplex
  • Your Vehicle: 71 Ed Mabry Jr. Fuel
  • General Location: South Coast
Re: FTI pg valve body
« Reply #4 on: November 24, 2018, 04:43:20 PM »
Is this a complete unit? Solenoid, solenoid valve, etc. ? If so I'm interested.

Mark

Offline wideopen231

  • Hero Member
  • *****
  • Posts: 1910
    • View Profile
  • Your Best Time: 1/8 3.70@ 198 1/4 5.78@245
  • Your Engine: Hemi 526 ci alcohol
  • Your Track: Piedmont
  • Your Vehicle: 225 CMC FED
  • General Location: NORTH CAROLINA
Re: FTI pg valve body
« Reply #5 on: November 26, 2018, 06:33:02 AM »
complete valve body with transbrake valve no solenoid. I guess it you want solenoid I can throw it in for 50 extra. I know valve body goes for 400 from fti with solenoid so still 150 cheaper and Less than 50 runs on it.
Relecting obama is like shooting right foot because it did not hurt enough when you shot left foot

Offline wideopen231

  • Hero Member
  • *****
  • Posts: 1910
    • View Profile
  • Your Best Time: 1/8 3.70@ 198 1/4 5.78@245
  • Your Engine: Hemi 526 ci alcohol
  • Your Track: Piedmont
  • Your Vehicle: 225 CMC FED
  • General Location: NORTH CAROLINA
Re: FTI pg valve body
« Reply #6 on: November 26, 2018, 07:20:17 AM »
wydopn2312@yahoo.com or 336 362 1785
Relecting obama is like shooting right foot because it did not hurt enough when you shot left foot

Offline gordon

  • Newbie
  • *
  • Posts: 43
    • View Profile
  • Your Track: Sacramento
  • Your Vehicle: FED
Re: FTI pg valve body
« Reply #7 on: November 28, 2018, 11:53:53 AM »
What type of device is used to prevent aplication of transbrake  further down trake causing lockup of tires or other breakage?

Offline wideopen231

  • Hero Member
  • *****
  • Posts: 1910
    • View Profile
  • Your Best Time: 1/8 3.70@ 198 1/4 5.78@245
  • Your Engine: Hemi 526 ci alcohol
  • Your Track: Piedmont
  • Your Vehicle: 225 CMC FED
  • General Location: NORTH CAROLINA
Re: FTI pg valve body
« Reply #8 on: November 28, 2018, 12:15:22 PM »
If using dealy box most have a timer that keeps from accidental engagement of transbake.You can wire switch in line to kill TB button power also. Other than that I guess keep away from button.
« Last Edit: November 28, 2018, 08:38:44 PM by wideopen231 »
Relecting obama is like shooting right foot because it did not hurt enough when you shot left foot

Offline wideopen231

  • Hero Member
  • *****
  • Posts: 1910
    • View Profile
  • Your Best Time: 1/8 3.70@ 198 1/4 5.78@245
  • Your Engine: Hemi 526 ci alcohol
  • Your Track: Piedmont
  • Your Vehicle: 225 CMC FED
  • General Location: NORTH CAROLINA
Re: FTI pg valve body
« Reply #9 on: December 16, 2018, 12:57:20 PM »
190 shipped
Relecting obama is like shooting right foot because it did not hurt enough when you shot left foot

Offline wideopen231

  • Hero Member
  • *****
  • Posts: 1910
    • View Profile
  • Your Best Time: 1/8 3.70@ 198 1/4 5.78@245
  • Your Engine: Hemi 526 ci alcohol
  • Your Track: Piedmont
  • Your Vehicle: 225 CMC FED
  • General Location: NORTH CAROLINA
Re: FTI pg valve body
« Reply #10 on: November 16, 2020, 04:16:48 AM »
Sold, Been sold I just forgot ad was here and did not post about it. SOrry.
Relecting obama is like shooting right foot because it did not hurt enough when you shot left foot