Author Topic: dry sump systems  (Read 4695 times)

Offline hemidakota

  • Full Member
  • ***
  • Posts: 210
    • View Profile
  • Your Best Time: 7.69 @ 173.5mph
  • Your Engine: 510 B1MC Wedge
  • Your Track: sacramento raceway
  • Your Vehicle: 02 200" fed
  • General Location: west coast
dry sump systems
« on: October 17, 2018, 08:44:13 PM »
So I would assume there are a few members here running dry sump systems. I would like to see pics of how everyone is doing it. I just pulled the trigger on a dry sump system for a few reasons. Mainly due to my heads having terrible oil return. At this point I have invested a lot of money and want to keep it happy for many years to come. I got a Peterson 5 stage set up, 3 from the pan and one from the top end is my plan. Thanks Greg
If it jams force it, if it breaks it needed replaced anyways

Offline Frontenginedragsters

  • Full Member
  • ***
  • Posts: 202
    • View Profile
    • Pro-Formance Specialties
Re: dry sump systems
« Reply #1 on: October 19, 2018, 04:46:03 AM »
I run a Peterson external wet system. It works great.
A dry sump might be next. Peterson makes great stuff.
Driving a Front Engine Dragster builds character and keeps you awake for a 1/4 mile at a time.
http://www.pro-formancespecialties.com/

Offline Paul New

  • Hero Member
  • *****
  • Posts: 745
    • View Profile
  • Your Best Time: 6.47 @ 214 MPH SBC
  • Your Engine: 387" SBC
  • Your Track: Woodburn Dragstrip
  • Your Vehicle: 2005 FED
Re: dry sump systems
« Reply #2 on: October 19, 2018, 08:28:11 AM »
I run a Peterson 4-stage system two in the pan with a third in the pan that also T-s into the valley.
I also run a 3-gallon Peterson tank

Offline jeff/21

  • Full Member
  • ***
  • Posts: 186
    • View Profile
  • Your Best Time: 8.24
  • Your Track: any with-in a 6hr radius
  • Your Vehicle: fed
Re: dry sump systems
« Reply #3 on: October 19, 2018, 10:58:23 AM »
ran a 4 stage dry sump in a inboard so the pump was driven from the flywheel side after a full season the bearings were like new 2 pick-ups in the pan one in the valley and the pressure in at the filter pad
Stef made the pans and tanks

Offline jeff/21

  • Full Member
  • ***
  • Posts: 186
    • View Profile
  • Your Best Time: 8.24
  • Your Track: any with-in a 6hr radius
  • Your Vehicle: fed
Re: dry sump systems
« Reply #4 on: October 19, 2018, 04:12:35 PM »
sorry I flushed the pics I had of the dry sump as i didn't need them and no longer involved with that assoc.

Offline coupemerc

  • Sr. Member
  • ****
  • Posts: 307
    • View Profile
  • Your Best Time: 3.86@188 (1/8 Mile), 5.97@233 (1/4 Mile)
Re: dry sump systems
« Reply #5 on: October 19, 2018, 04:40:10 PM »
I'm running a dry sump, Peterson tank, Peterson R4 pump, 50% crank speed, 4 pick ups in the oil pan, N&P oil pan and a Peterson in line filter. There is also a star mountain motor vac pump pulling from the valve cover. Will attach some pictures tomorrow
« Last Edit: October 20, 2018, 06:59:04 AM by coupemerc »

Offline hemidakota

  • Full Member
  • ***
  • Posts: 210
    • View Profile
  • Your Best Time: 7.69 @ 173.5mph
  • Your Engine: 510 B1MC Wedge
  • Your Track: sacramento raceway
  • Your Vehicle: 02 200" fed
  • General Location: west coast
Re: dry sump systems
« Reply #6 on: October 21, 2018, 04:47:30 PM »
So I gotta ask, Paul how much vacuum do you see in the engine? Coupemerc you have a very different set up, how much vacuum do you pull? I worked at weaver brothers as a kid and dry sumps pulled crazy vacuum back in the day but now a days it is not the same. I only want 10 to 12" unless I am missing something. I am not looking for every bit of power as for I am going to have to slow it down to do what I want. I just want to go over 200 mph some day.
If it jams force it, if it breaks it needed replaced anyways

Offline Paul New

  • Hero Member
  • *****
  • Posts: 745
    • View Profile
  • Your Best Time: 6.47 @ 214 MPH SBC
  • Your Engine: 387" SBC
  • Your Track: Woodburn Dragstrip
  • Your Vehicle: 2005 FED
Re: dry sump systems
« Reply #7 on: October 21, 2018, 06:01:34 PM »
I don’t have a data logger on my car so no clue

Offline masracingtd1167

  • Hero Member
  • *****
  • Posts: 1138
  • bill masiello Shelton Ct.
    • View Profile
  • Your Best Time: 7.40's at 181 on motor 6.94 at 192 nitrous
  • Your Engine: 394 chevy
  • Your Track: Lebanon Valley Dragway
  • Your Vehicle: 2003 Neil and Parks
Re: dry sump systems
« Reply #8 on: October 23, 2018, 12:46:10 PM »
If it's a wet sump you are just fine at 10 to 12 inches !

Offline coupemerc

  • Sr. Member
  • ****
  • Posts: 307
    • View Profile
  • Your Best Time: 3.86@188 (1/8 Mile), 5.97@233 (1/4 Mile)
Re: dry sump systems
« Reply #9 on: October 24, 2018, 05:47:49 PM »
My set up is making 13" going down the track. It made more on the dyno which is a bit puzzling? Seems to me the gasoline combinations are capable of making the big vacuum numbers. Tougher to seal the rings on methanol.

Offline hemidakota

  • Full Member
  • ***
  • Posts: 210
    • View Profile
  • Your Best Time: 7.69 @ 173.5mph
  • Your Engine: 510 B1MC Wedge
  • Your Track: sacramento raceway
  • Your Vehicle: 02 200" fed
  • General Location: west coast
Re: dry sump systems
« Reply #10 on: October 25, 2018, 06:55:47 PM »
Coupemerc how much oil do you run in your set up? It appears I have the same system, 1.2" pressure and 1.4" scavenge 5 stage and the same tank. Thanks. Figured you were pulling way more vacuum, interesting. The money we spend to go fast...
If it jams force it, if it breaks it needed replaced anyways

Offline coupemerc

  • Sr. Member
  • ****
  • Posts: 307
    • View Profile
  • Your Best Time: 3.86@188 (1/8 Mile), 5.97@233 (1/4 Mile)
Re: dry sump systems
« Reply #11 on: October 26, 2018, 12:16:10 PM »
I put 10 Quarts of oil in mine if it's completely dry, 9 quarts on a change. You need the tank to be about 1/2 to 2/3 full with the oil hot and motor at about 3000rpm. The only "downside" to mine so far is that it's making insane oil pressure. 100 psi just off idle and who knows where it is at 10.2K? I've been working at bringing that way,way down. Even with the super high oil pressure, the bearing still look good. Bringing the the pressure down to something reasonable will help free up some power and allow the DS and Vac systems to work better. The motor pulled 18" of vacuum on Iaconio's dyno.