Author Topic: Inline 6 in FED?  (Read 28733 times)

Offline Blind Mule

  • Full Member
  • ***
  • Posts: 118
    • View Profile
Re: Inline 6 in FED?
« Reply #15 on: March 27, 2013, 10:53:24 PM »
Pat I love your car I have seen it on you tube my build was just gonna be a mild bracket race motor can't afford anything like you run BUT i would if I had the funds ;) I found a 240 head then they called me back and said it was cracked so I just about have given up on the 6 project! I have a 331 stroker I may use and I have a 289 also but I really wanted to give the inline a try :-[ Maybe one day!!

Good luck on your Comp racing keep us posted  ;)

  Randy!

Offline denverflatheader

  • Sr. Member
  • ****
  • Posts: 332
    • View Profile
Re: Inline 6 in FED?
« Reply #16 on: March 29, 2013, 07:32:18 AM »
FordComp - thanks for picture, nice setup.  What would be search name for your youtube video?  Do you mind sharing what the intake valve diameter is on your AJPE?  Welcome too.  DF

Offline GlennLever

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2058
    • View Profile
    • The Lever Family Site
  • Your Best Time: 1/4 mile 7.950 at 165 MPH
  • Your Engine: Pontiac 461 Alky Blown
  • Your Track: Empire Dragway, NY
  • Your Vehicle: Front Engine Dragster
Re: Inline 6 in FED?
« Reply #17 on: March 29, 2013, 07:55:59 AM »
FordComp - thanks for picture, nice setup.  What would be search name for your youtube video?  Do you mind sharing what the intake valve diameter is on your AJPE?  Welcome too.  DF
Post the u-tube vide link here.
Glenn R. Lever
Rochester, New York 14617-2012
My Cars https://www.lever-family-racing.com/

Offline FordComp

  • Newbie
  • *
  • Posts: 2
    • View Profile
  • Your Best Time: 7.20
  • Your Track: BIR
  • Your Vehicle: Parks FED
Re: Inline 6 in FED?
« Reply #18 on: March 30, 2013, 10:56:47 PM »
Here are two that we did with a go pro camera... if someone knows of any others please post a link.  I know that I am in some other out there but would be interested to see what is out there. 

  in front of motor facing down track

in front of motor looking back.

 

Pat


Offline Alkydigger

  • Newbie
  • *
  • Posts: 9
    • View Profile
    • AlkyDigger Fuel Injection, Superchargers, Ignitions
  • Your Best Time: 6.81 qtr
  • Your Engine: Early Hemi, 400 , Alcohol, Donovan
  • Your Vehicle: Non Currently
  • General Location: Nashville TN
Re: Inline 6 in FED?
« Reply #19 on: March 31, 2013, 02:36:04 PM »
Here is my 294 cu in JEEP engine
Custome everything
billet head
Girdle
Custom Hilborn injection by www.Alkydigger.com 
Ran 6.40 in the 1/8th with a 3.89  gear-  needed a 4.56 bad.... we changed to a 4.56 ut blew the engine  before we ran it again .

Mike Chilando   www.Alkydigger.com   
Mike Chilando
http://www.alkydigger.com/
info@alkydigger.com |615-457-3192

Offline denverflatheader

  • Sr. Member
  • ****
  • Posts: 332
    • View Profile
Re: Inline 6 in FED?
« Reply #20 on: April 01, 2013, 07:32:54 AM »
FordComp - thanks for posting videos, was a nice surprise to see run with 5 spd, very smooth, compared to what I was expecting.

Alkydigger - I couldn't see your picture, came up blank for me?

Offline Ukelop

  • Newbie
  • *
  • Posts: 1
    • View Profile
    • Stayhome Now
  • Your Best Time: getcialisnw.com
  • Your Engine: getcialisnw.com
  • Your Track: getcialisnw.com
  • Your Vehicle: getcialisnw.com
  • General Location: getcialisnw.com
Re: Inline 6 in FED?
« Reply #21 on: June 20, 2020, 06:25:53 AM »
Usa deliveryOnline cialis sube tension arterialcialis 5mg beipackzettel
Online buy cialis online
cialis rubor facial
cialis cost buy cialis online price

Offline THE FRENCHTOWN FLYER

  • Sr. Member
  • ****
  • Posts: 360
    • View Profile
  • Your Best Time: 8.28@168 door; 9.00@147 6-cyl alt; 8.53@160 RED
  • Your Engine: 300 Ford six NA w/ crossflow and prod. heads
  • Your Track: Milan, Thompson
  • Your Vehicle: (3) Advanced Chassis altered , The Last Logghe altered, '30 RPU
  • General Location: North Coast
Re: Inline 6 in FED?
« Reply #22 on: June 20, 2020, 11:50:24 AM »
... my build was just gonna be a mild bracket race motor can't afford anything like you run BUT i would if I had the funds... I really wanted to give the inline a try :-[ Maybe one day!!

Good luck on your Comp racing keep us posted  ;)

  Randy!
Here's a shot of my Ford Super Pro bracket car I did last Sunday

https://mail.google.com/mail/u/0?ui=2&ik=00a8ad44e3&attid=0.1&permmsgid=msg-f:1669621087338001293&th=172baf886c48738d&view=att&disp=safe