Author Topic: introduction  (Read 3510 times)

Offline markrocha49

  • Newbie
  • *
  • Posts: 4
    • View Profile
  • Your Best Time: NONE
  • Your Engine: 354HEMI
  • Your Track: BAKERSFIELD
  • Your Vehicle: 190" FED
  • General Location: WEST COAST
introduction
« on: July 08, 2018, 01:32:06 AM »
Hello to all the forum members
My name is Mark I am a 55 year old light rail electro mechanic That just purchased a late 60 early 70's FED according to the NHRA inspector who just certified the Chassis. I have only fired this thing up twice and have not driven it. It has just moved into the garage from the trailer and will be torn down to update all of the safety equipment for the NE1 class it ran in prior to me owning it. After that I will try moving it around at idle in a empty parking lot prior to taking it to the track. My car was last run in 2010 on the west coast. I have turned wrenches for a long time but have no experience maintaining a blown race Hemi. I am open to all advice in learning about what it takes to get one of these things down the track. I wanted one of these things since I was a kid building models so here we go! Just an old guy trying to squeeze in to a race car

Offline GlennLever

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2058
    • View Profile
    • The Lever Family Site
  • Your Best Time: 1/4 mile 7.950 at 165 MPH
  • Your Engine: Pontiac 461 Alky Blown
  • Your Track: Empire Dragway, NY
  • Your Vehicle: Front Engine Dragster
Re: introduction
« Reply #1 on: July 08, 2018, 04:37:23 AM »
Welcome, lots of advice here. Glenn
Glenn R. Lever
Rochester, New York 14617-2012
My Cars https://www.lever-family-racing.com/

Offline opa1

  • Full Member
  • ***
  • Posts: 155
    • View Profile
  • Your Best Time: 5:60 1/8
  • Your Engine: 355 Chevy Methanol Injected
  • Your Track: Alamo City Motorplex
  • Your Vehicle: 71 Ed Mabry Jr. Fuel
  • General Location: South Coast
Re: introduction
« Reply #2 on: July 08, 2018, 07:52:41 AM »
Welcome! I'm a Mark too and your story parallels my own. Get some pic's up.

Offline AF150

  • Jr. Member
  • **
  • Posts: 92
  • The Devil is in the Details
    • View Profile
  • Your Best Time: 7.37 1/4 mile
  • Your Engine: Early Hemi, 365", Blown Alky
  • Your Track: Tulsa Raceway Park
  • Your Vehicle: 200" FED
Re: introduction
« Reply #3 on: July 08, 2018, 08:27:16 AM »
Welcome Mark.  I have run a similar rig...will help if I can.
MB

Offline glofria

  • Full Member
  • ***
  • Posts: 139
    • View Profile
  • Your Best Time: 7.323 @ 185.05
  • Your Engine: A blown 388 c.i. Small Block Chevy
  • Your Track: Auto Club Famoso Raceway
  • Your Vehicle: An original 1957 Chevy Bel-Air
  • General Location: Southern California
Re: introduction
« Reply #4 on: July 09, 2018, 12:00:31 PM »
Welcome Mark,

Look me up at the next ANRA race and anyone in our group will be more than willing to answer ay questions you have or assist you in any way we can.

Gino Ofria
VHS Racing
A/GS '57 Chevy Bel Air
NE1 FED (Eily Stafford-Day driver)

Offline GlennLever

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2058
    • View Profile
    • The Lever Family Site
  • Your Best Time: 1/4 mile 7.950 at 165 MPH
  • Your Engine: Pontiac 461 Alky Blown
  • Your Track: Empire Dragway, NY
  • Your Vehicle: Front Engine Dragster
Re: introduction
« Reply #5 on: July 09, 2018, 12:34:14 PM »
A Response from Glofria is note worthy.
Glenn R. Lever
Rochester, New York 14617-2012
My Cars https://www.lever-family-racing.com/

Offline gregm784

  • Sr. Member
  • ****
  • Posts: 384
    • View Profile
    • Means Racing
  • Your Engine: 365" GenIV SBC
  • Your Track: Famoso Raceway
  • Your Vehicle: 1997 Stirling 200" FED
Re: introduction
« Reply #6 on: July 10, 2018, 09:21:53 AM »
Welcome!  I second the ANRA idea. August 24-26 is our next go for ANRA.

www.anra.com/
Greg
El Dorado County, CA
www.meansracing.com

Offline markrocha49

  • Newbie
  • *
  • Posts: 4
    • View Profile
  • Your Best Time: NONE
  • Your Engine: 354HEMI
  • Your Track: BAKERSFIELD
  • Your Vehicle: 190" FED
  • General Location: WEST COAST
Re: introduction
« Reply #7 on: July 12, 2018, 12:34:11 AM »
Thank you everybody for the warm welcome, I will post pics after my car is put back together. I had to remove and recertify all safety equipment and have not received it back yet. I will be at the ANRA event in Bakersfield and I will take you guys up on your invite!