Author Topic: Water manifold  (Read 2062 times)

Offline opa1

  • Full Member
  • ***
  • Posts: 155
    • View Profile
  • Your Best Time: 5:60 1/8
  • Your Engine: 355 Chevy Methanol Injected
  • Your Track: Alamo City Motorplex
  • Your Vehicle: 71 Ed Mabry Jr. Fuel
  • General Location: South Coast
Water manifold
« on: July 06, 2018, 11:27:22 AM »
I bought this Moroso manifold. I've been staring at it for hours trying to figure out how I'm going to make it work. It came with #8 hoses. I could machine some type of bracket but, I hate hanging stuff that doesn't look right. I'm wanting to run water in the block only.  Any ideas?

Mark
« Last Edit: July 06, 2018, 11:28:54 AM by opa1 »

Offline opa1

  • Full Member
  • ***
  • Posts: 155
    • View Profile
  • Your Best Time: 5:60 1/8
  • Your Engine: 355 Chevy Methanol Injected
  • Your Track: Alamo City Motorplex
  • Your Vehicle: 71 Ed Mabry Jr. Fuel
  • General Location: South Coast
Re: Water manifold
« Reply #1 on: July 06, 2018, 12:08:45 PM »
I might be able to run the hose from the rear water ports. Would make it easier.