Author Topic: car lift  (Read 2614 times)

Offline 421Altered

  • Newbie
  • *
  • Posts: 17
    • View Profile
  • Your Best Time: 5.09 in 1/8th
  • Your Engine: alky injected 421sbc
  • Your Track: Adel, Ga.
  • Your Vehicle: 125" Altered
  • General Location: South Georgia
car lift
« on: May 15, 2018, 09:45:32 PM »
What do you guys use to get your car up off the shop floor so that you can work on it easier?  I've got a 4 post lift that I use and it works pretty well, but, since my altered is pretty narrow sometimes it's a pain to lean far enough in to work on the car on account of the ramps.  However it's great for work under the car as there are no cross bars in the way.  Does any company make a lift designed for narrow cars?

Offline AWAG

  • Newbie
  • *
  • Posts: 15
    • View Profile
  • Your Track: KRPI
  • Your Vehicle: altered
Re: car lift
« Reply #1 on: May 16, 2018, 05:08:16 AM »
I think it's Mohawk that has a four post that the rails are adjustable. It's on my dream list for the new shop but unfortunately it's out of my budget. Since that one's out I'm trying to decide if I want a 2 or 4 post lift.

Offline Paul New

  • Hero Member
  • *****
  • Posts: 745
    • View Profile
  • Your Best Time: 6.47 @ 214 MPH SBC
  • Your Engine: 387" SBC
  • Your Track: Woodburn Dragstrip
  • Your Vehicle: 2005 FED
Re: car lift
« Reply #2 on: May 16, 2018, 05:38:48 AM »
I just use my warm up stands for at the track.  I have used my 2-post to pull the pan but typically we have a project on it so not worth the effort

Offline gregm784

  • Sr. Member
  • ****
  • Posts: 384
    • View Profile
    • Means Racing
  • Your Engine: 365" GenIV SBC
  • Your Track: Famoso Raceway
  • Your Vehicle: 1997 Stirling 200" FED
Re: car lift
« Reply #3 on: May 16, 2018, 11:30:54 AM »
WHen not at the track, mine tends to live on it's warm up stands too. 

Projacks would be nice....waiting on that money tree to take root
Greg
El Dorado County, CA
www.meansracing.com

Offline Draw 3D

  • Jr. Member
  • **
  • Posts: 77
    • View Profile
  • Your Engine: Blown Alky 406 SBC
  • Your Track: Wild Horse Pass
  • Your Vehicle: 1923 T Roadster
  • General Location: Arizona
Re: car lift
« Reply #4 on: May 16, 2018, 11:49:25 AM »
I made some stands from left over square tubing for the front and back that are on wheels so I can move the car around as needed and plenty strong enough to do all necessary maintenance and even fire the car up.

Offline Paul New

  • Hero Member
  • *****
  • Posts: 745
    • View Profile
  • Your Best Time: 6.47 @ 214 MPH SBC
  • Your Engine: 387" SBC
  • Your Track: Woodburn Dragstrip
  • Your Vehicle: 2005 FED
Re: car lift
« Reply #5 on: May 16, 2018, 01:26:56 PM »
WHen not at the track, mine tends to live on it's warm up stands too. 

Projacks would be nice....waiting on that money tree to take root

Yes mine live on the stands at home also

Projacks.... yes on my wish list