Author Topic: Safety equipment...  (Read 8594 times)

Offline Scottmech

  • Newbie
  • *
  • Posts: 19
    • View Profile
  • Your Best Time: none......yet
  • Your Engine: Chevy 350 alky injected
  • Your Track: Commerce
  • Your Vehicle: Believed to be 137" Woody Jr Fueler from mid 60's
  • General Location: Atlanta
Re: Safety equipment...
« Reply #15 on: March 14, 2018, 05:30:19 AM »
I've had 1 and 2 piece suits.  Like the 2 piece.  Profox makes a really good -15 suit for the money.  $900 for suit and jacket, and they offer a lot of over the counter sizes so you can get a good fit.  Has sewn in arm restraints.  They also recertify their products.  Not too thick either.  Seem to have most if not all sizes in stock. 

I've been on fire and got burned.  Burns are some of the worst and most painful injuries to recover from.  Spend the money and get good protection.....even if the track doesn't require it. 

Offline speedbump

  • Newbie
  • *
  • Posts: 16
    • View Profile
  • Your Best Time: n/a
  • Your Track: e-town lebbaon valley
  • Your Vehicle: fed
Re: Safety equipment...
« Reply #16 on: March 18, 2018, 01:54:25 PM »
before looking at what you should buy safety wise you need to figure out what type of vehicle. your going to be running. if its a stocker then you don't need a sfi 15 suit. all tracks require safety equipment except maybe outlaw ones. your best bet is to either call your div. director or buy a rule book. both can tell you what you will need. Good luck

Offline 32bantam

  • Full Member
  • ***
  • Posts: 117
    • View Profile
    • SS3 Race Team
  • Your Best Time: 6.87 at BG 2013 aiming for 7.0
  • Your Track: Empire Dragway, NY
  • Your Vehicle: 32 Bantam altered
Re: Safety equipment...
« Reply #17 on: March 22, 2018, 07:45:15 AM »
DJ Safety.......BIG Ben........
the only company to call
Steve Walczak