Classifieds (Please No Dealers) > Wanted to buy

I need SBC dragster headers

(1/2) > >>

longm1958:
I am looking for a good used set of dragster headers, zoomies, upswept, etc Let me know what you have
Thanks

Mike L in Ga

GlennLever:
I came across this

Zoomie headers kit, 2", NOS, alky nitro dragster

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=321084022872&ssPageName=ADME:B:SS:US:1123

225digger:
i make zoomies for most popular makes ,  bbc sbc etc , i do my own bending and typically have them in stock .   here is a link to my ebay  http://www.ebay.com/sch/tedsfabrication/m.html?_nkw=&_armrs=1&_from=&_ipg=25&_trksid=p3692

or give me a call 717-647-7818  i sell a 2" primary zoomie with stahl flanges for 265.00  completly tig welded with 3/8 flanges and 16g tubes .



mods sorry if this post is out of line ... hopefully its not ..

thanks ted

GlennLever:

--- Quote from: 225digger on March 05, 2013, 07:30:45 PM ---i make zoomies for most popular makes ,  bbc sbc etc , i do my own bending and typically have them in stock .   here is a link to my ebay  http://www.ebay.com/sch/tedsfabrication/m.html?_nkw=&_armrs=1&_from=&_ipg=25&_trksid=p3692

or give me a call 717-647-7818  i sell a 2" primary zoomie with stahl flanges for 265.00  completly tig welded with 3/8 flanges and 16g tubes .



mods sorry if this post is out of line ... hopefully its not ..

thanks ted

--- End quote ---

I think you are on target, a member asked and you responded.

"Rule" is dealers are request not to list items, you did not do so, you responded to a memeber's request and need.

Not to hijack this thread, but I will, What I found interesting was the powder coat oven you have on e-bay. I do powder coat. I have an old lab oven that works for me but in this case bigger is better, my problem would be it would have to come apart to go down the stairs to the basement (it is electric, convection, vented).

225digger:
glenn , the powder ovens is actually the main part of my business , been making them for a long time , unfortunatly , my ovens are complete they dont come apart , i have in the past made ovens alittle narrow so guys could get them down stairs and through door ways , but even those dont come apart . if you have any questions just shoot me an email or give me a call  tedsfab@gmail.com  thanks ted

Navigation

[0] Message Index

[#] Next page