Author Topic: 392 roller cam wanted  (Read 4380 times)

Offline Merryknees

  • Newbie
  • *
  • Posts: 25
    • View Profile
  • Your Best Time: 7.90 / 170mph 1/4mile
  • Your Engine: blown methanol 392 hemi
  • Your Track: Jurby, isle of man
  • Your Vehicle: 39 Topolino + 41 Willys coupe
  • General Location: Isle of Man UK
392 roller cam wanted
« on: January 06, 2018, 02:11:04 AM »
Wanted solid roller cam to suit methanol injected 671 blown 392 powered topolino altered.
Looking for a mid range profile between 5000 rpm - 7500 rpm which is not too hard on the valve train. I run after market billet roller rockers.
New or used considered, will take advise on the profile.
We are located on the Isle of Man UK.
BUT coming over to the March Meet so hopefully can collect there.

Would really appreciate help as struggling to find anyone reply to emails sent out.

Ian
ianmerry@wimanx.net
         

Offline hotrodpete

  • Newbie
  • *
  • Posts: 45
    • View Profile
  • Your Best Time: 9.8@138
  • Your Engine: Early hemi
  • Your Track: St Thomas
  • Your Vehicle: Rooman Fiat altered
  • General Location: Orillia, Ontario
Re: 392 roller cam wanted
« Reply #1 on: January 06, 2018, 06:14:16 AM »
Are you on Facebook? 392 Hemi racing group. Shayne Stewart had one for sale. 
At the PRI show bullet racing was a favorite, they raced these and seem knowledgeable.
If you have the time in LA drop in to Isky, he's a hoot. 

If you don't mind I would love to meet up at Bakersfield. I'm  there all weekend, Peter

Offline Merryknees

  • Newbie
  • *
  • Posts: 25
    • View Profile
  • Your Best Time: 7.90 / 170mph 1/4mile
  • Your Engine: blown methanol 392 hemi
  • Your Track: Jurby, isle of man
  • Your Vehicle: 39 Topolino + 41 Willys coupe
  • General Location: Isle of Man UK
Re: 392 roller cam wanted
« Reply #2 on: January 06, 2018, 08:02:46 AM »
Thanks for the reply Pete. Yes I have seen that add on the facebook page and messaged Shayne  ;)
Are you talking bullett racing cams? [googled]
Hope to call in a few speedshops when in LA so will add to list. Yes sure we can meet up in Bakersfield.
Nice Woody Willys
Here's my Willys


Offline dusterdave173

  • Hero Member
  • *****
  • Posts: 638
    • View Profile
  • Your Best Time: 5.38in 1/8th
  • Your Engine: 355 CI SBC
  • Your Track: Mooresville, NC
  • Your Vehicle: CenPen 200 inch FED
Re: 392 roller cam wanted
« Reply #3 on: January 06, 2018, 10:30:16 AM »
Ruben Racing Cams in Calif is guy that did all of Herberts grinds--he does early hemis and has the Herbert catalog
Ruben is pretty cool guy --last ones I ordered were reasonable
I have always had a fascination with fast cars at the expense of more normal character development

Offline Merryknees

  • Newbie
  • *
  • Posts: 25
    • View Profile
  • Your Best Time: 7.90 / 170mph 1/4mile
  • Your Engine: blown methanol 392 hemi
  • Your Track: Jurby, isle of man
  • Your Vehicle: 39 Topolino + 41 Willys coupe
  • General Location: Isle of Man UK
Re: 392 roller cam wanted
« Reply #4 on: January 06, 2018, 10:49:32 AM »
Ruben Racing Cams in Calif is guy that did all of Herberts grinds--he does early hemis and has the Herbert catalog
Ruben is pretty cool guy --last ones I ordered were reasonable
Do you have his email address. Tried their webpage and facebook but the contact pages will not work!

Offline LZ

  • Full Member
  • ***
  • Posts: 210
    • View Profile
  • Your Engine: In progress
  • Your Track: Empire Dragway
  • Your Vehicle: 2010 225" S&W
Re: 392 roller cam wanted
« Reply #5 on: January 06, 2018, 12:28:15 PM »
Hello Ian:
Sent you an Email.
thank you
Luke
"I am not a number.... I am a free man."

Offline hotrodpete

  • Newbie
  • *
  • Posts: 45
    • View Profile
  • Your Best Time: 9.8@138
  • Your Engine: Early hemi
  • Your Track: St Thomas
  • Your Vehicle: Rooman Fiat altered
  • General Location: Orillia, Ontario
Re: 392 roller cam wanted
« Reply #6 on: January 06, 2018, 02:09:41 PM »
Yes, Bullet racing cams and another company were together at PRI. Very helpfully. But I think they are in the New Orleans area. I can forward more info when I get back home.
 Try Brendan Murray also, he moves a bunch of stuff.

Offline racerken

  • Jr. Member
  • **
  • Posts: 52
    • View Profile
  • Your Best Time: 8.76 1/4 mile (FED)
  • Your Track: State Capital Raceway
  • Your Vehicle: FED
  • General Location: Baton Rouge La
Re: 392 roller cam wanted
« Reply #7 on: January 06, 2018, 06:13:14 PM »
Bullet Cams is located in Olive Branch, Mississippi