Author Topic: SFI 2.2 C vs SFI 2.4C  (Read 3220 times)

Offline MMRE

  • Newbie
  • *
  • Posts: 1
    • View Profile
  • Your Best Time: 1/4 Mile
  • Your Engine: 400 Cid Small Block Ford Injeted
  • Your Track: Mosport Cayuga ST Thomas
  • Your Vehicle: FED
  • General Location: Brantford Ontario Canada
SFI 2.2 C vs SFI 2.4C
« on: December 21, 2017, 05:13:04 PM »
Helo every one.  Glad to be here.  This is my first post,  can any one tell me the difference between SFI  2.2C  5.99 and Quicker   and SFI  2.4 C  FED 6.0   

Thank you Mike Morrison

Offline rooman

  • Hero Member
  • *****
  • Posts: 559
    • View Profile
  • Your Best Time: 6.200/222.05 (1/4 mile--NT/F)
Re: SFI 2.2 C vs SFI 2.4C
« Reply #1 on: December 22, 2017, 03:51:02 AM »
Mike,
       upper rails must be 1.5" to the mid plate (2" ahead of it to be specific), kidney bars and rear cross member, rear end upright wall thickness, lower frame rail diameter behind rear end uprights, pinion cross member wall thickness, seat brace diameter, rear end bay diagonals, side bay upright and diagonal diameter/wall thickness. There are also some criteria for the tubing in the bay ahead of the rear end uprights depending on the rear end mounting version used.

Roo
Yeah, I am from the south--any further south and I would have been a bloody penguin.