Author Topic: Christmas is coming.  (Read 4718 times)

Offline GlennLever

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2010
    • View Profile
    • The Lever Family Site
  • Your Best Time: 1/4 mile 7.950 at 165 MPH
  • Your Engine: Pontiac 461 Alky Blown
  • Your Track: Empire Dragway, NY
  • Your Vehicle: Front Engine Dragster
Christmas is coming.
« on: October 30, 2017, 08:38:14 PM »
I made metal stuff for Christmas presents last year.



If you had some broken, unusable transmission parts (gears and bearings), feel like donating them and are coming to the banquet I could find a good use for them.

Glenn
Glenn R. Lever
Rochester, New York 14617-2012
My Cars https://www.lever-family-racing.com/

Offline THE FRENCHTOWN FLYER

  • Sr. Member
  • ****
  • Posts: 360
    • View Profile
  • Your Best Time: 8.28@168 door; 9.00@147 6-cyl alt; 8.53@160 RED
  • Your Engine: 300 Ford six NA w/ crossflow and prod. heads
  • Your Track: Milan, Thompson
  • Your Vehicle: (3) Advanced Chassis altered , The Last Logghe altered, '30 RPU
  • General Location: North Coast
Re: Christmas is coming.
« Reply #1 on: October 31, 2017, 08:59:59 AM »
How do you keep the air cleaners from flopping around on the U-joint?

Offline GlennLever

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2010
    • View Profile
    • The Lever Family Site
  • Your Best Time: 1/4 mile 7.950 at 165 MPH
  • Your Engine: Pontiac 461 Alky Blown
  • Your Track: Empire Dragway, NY
  • Your Vehicle: Front Engine Dragster
Re: Christmas is coming.
« Reply #2 on: October 31, 2017, 09:34:20 AM »
How do you keep the air cleaners from flopping around on the U-joint?

You can see the while project here.

https://www.lever-family-racing.com/my-metal-art/lamp-002-2016-12-21





Glenn R. Lever
Rochester, New York 14617-2012
My Cars https://www.lever-family-racing.com/

Offline bikeguy307

  • Full Member
  • ***
  • Posts: 241
    • View Profile
Re: Christmas is coming.
« Reply #3 on: October 31, 2017, 05:40:14 PM »
I will bring some things with me.

Offline GlennLever

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2010
    • View Profile
    • The Lever Family Site
  • Your Best Time: 1/4 mile 7.950 at 165 MPH
  • Your Engine: Pontiac 461 Alky Blown
  • Your Track: Empire Dragway, NY
  • Your Vehicle: Front Engine Dragster
Re: Christmas is coming.
« Reply #4 on: October 31, 2017, 08:30:10 PM »
Thanks!
Glenn R. Lever
Rochester, New York 14617-2012
My Cars https://www.lever-family-racing.com/

Offline PSweeney

  • Full Member
  • ***
  • Posts: 231
    • View Profile
  • Your Track: Santa Pod
  • Your Vehicle: 138in SBC slingshot
Re: Christmas is coming.
« Reply #5 on: November 05, 2017, 03:01:29 PM »
How do you keep the air cleaners from flopping around on the U-joint?

Easy, never grease them and run them out of phase  :)

Offline GlennLever

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2010
    • View Profile
    • The Lever Family Site
  • Your Best Time: 1/4 mile 7.950 at 165 MPH
  • Your Engine: Pontiac 461 Alky Blown
  • Your Track: Empire Dragway, NY
  • Your Vehicle: Front Engine Dragster
Re: Christmas is coming.
« Reply #6 on: November 05, 2017, 04:19:40 PM »
The u-joints are welded up
Glenn R. Lever
Rochester, New York 14617-2012
My Cars https://www.lever-family-racing.com/