Author Topic: Oil Filters  (Read 8931 times)

Offline GlennLever

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2058
    • View Profile
    • The Lever Family Site
  • Your Best Time: 1/4 mile 7.950 at 165 MPH
  • Your Engine: Pontiac 461 Alky Blown
  • Your Track: Empire Dragway, NY
  • Your Vehicle: Front Engine Dragster
Re: Oil Filters
« Reply #15 on: October 04, 2017, 10:46:20 AM »
I have a remote System 1, I like it a lot.



and yes I have a belt guard (not pictured)  to protect the lines.

Glenn, does your frame rail cross right in front of the oil filter mount holes? I'm A newbie and running a Pontiac also.

Sorry I missed you post. Yes it does, I use an old Mickey Thompson remote oil filter adapter to turn the ports on the side of the engine 90 degrees and run AN lines to the filter.

There is VERY little space between the adapter and the upper rail. I'm not sure that even 90 degree AN fittings would work.

On the new engine I have a machined block that does the same thing

Glenn R. Lever
Rochester, New York 14617-2012
My Cars https://www.lever-family-racing.com/